Jump to content
SAU Community

Recommended Posts

Good job man, slow speed manoeuvres are the most difficult skill to perfect!

As the fella at the end was saying; finding clutch friction point, with a little throttle, and controlling speed with the rear brake is the trick with low speed.

Having the drivetrain loaded, and utilising the gyro effect of the motor spinning, stabilises the bike; rather than the unavoidable jerky on/off action when using the throttle around idle.

It isn't so bad on a short geared, torquey single, but on a big bike with tall gearing (mine does 164km/h in first) you simply can't get away with riding at idle, with the clutch all the way out. Once you nail that, you'll never look back.

Great to be able to practice, and pick up tips from experienced riders. Nice job with the BMW as well.

  • Like 1

cheers Dale :)

Yeah I think a lot of it has to do with the bike, I basically sit upright like a pushy so I find slow speed manoeuvres to be a bit easier. There were a few others on the day who were struggling & they were on sports bikes ie ninjas & cb's etc.

It's a fantastic thing to have something like this for learners for free & in Sydney. Once I get more experience I wouldn't mind helping them out to keep these sessions running :)

  • Like 1

20150114_1903061024x719_zps078d6c85.jpg

Quick update. Now with added windkeeperoffythingamajig doovelacky. It's a genuine Yamaha accessory, was a super p.i.t.a getting to the bolts that hold it in place.

Me Rikey

I can tell the difference definitely. I can keep my visor open & it feels like a gentle waft of air. Should work well when winter rolls around, I can duck behind the screen :)

  • Like 1

Nicely done, your head was nice and steady.

Good to see everyone wearing protective gear though :/ lol

Dirt rider in me wanted your U-Turns to be more rear brake and clutch and slidy slidies haha

  • Like 2

Nicely done, your head was nice and steady.

Good to see everyone wearing protective gear though :/ lol

Dirt rider in me wanted your U-Turns to be more rear brake and clutch and slidy slidies haha

Shhhhh slides were off camera ;p

Majority of people did have protective gear, just took it off while we were on the course.

I wasn't complaining when the blondie took her jacket off ;)

It would appear another benefit of my windscreen is that my fuel economy has improved :)

Fuel light used to come on around 220km mark, now it comes on around 250k's

not bad for a bit of plastic

  • 3 weeks later...

Passed my MOST test with no errors. Sweet as!

db1_zpsd6q34t0a.jpg

Some pretty cool women ride the scooter & suzuki intruder next to my bike

20150214_123633%20800x543_zpsyow9juwa.jp

My project will amost be done, maybe in the next 2-3 months. Then I can focus my attention back on the old fairlady Z, poor girl has been neglected :)

Picking up my fuel tank & fenders from Craved Coatings first thing in the morning. Time to strip the bike (again)

Would probably have been a less messy affair if I rode the bike until empty before taking out the fuel tank lol

20150220_225322%201024x604_zpsnornwgyk.j

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Alarm installs, always great to look at 🥲 Then these alarm installers then go and do automotive looms and they end up being a crock of shit.
    • Photo quality is terrible, but there's a few things on that board that give me suspicions it has some issues. Add to that, I'm hoping the cut and exposed wires under the dash were not exposed or touching each other before you pulled that all apart.
    • Stories like this are why the immobilizer installs I've done are 100% reversible. No harness cuts.
    • update; Replaced oem starter motor with a Jaylec 70-61111 car still didn't start, moved over to the alarm system unraveled the spaghetti checked the solder end points, PCB board burn smell, wiring ends, capacitors, water damage everything looked fine restarted car vroom. restarted 5 to 6 time over an hour started put every thing back together only to not have it start any more. looks like i will be removing the alarm system next weekend.      
    • Lots of people. Could be a lot of things like people have said. Either the heater hose/pipe, the turbo coolant return that wraps around the back of the engine, or a core plug. I have seen all three. If you want me to guess wildly though I would bet it's one of those hoses for the turbo coolant return. Or the brazing/welding for the Y- section has failed. Get a borescope down there to be 100% sure.
×
×
  • Create New...