Jump to content
SAU Community

Recommended Posts

Ok so I'll start at the beginning my R34 Gtt series 2 had the exhaust wheel snap off the turbo, as I am on a budget I bought second hand standard turbo, running standard boost it drove fine for about a week, then all of a sudden I noticed a noise like a squeal and my boost dropped off, so immediately stopped, it hasn't over heated nor is the oil creamy so was hoping someone might have some idea don't want to pull off the head if it's just a cracked turbo internally is there some way of checking I noticed aswell that I can idle the car no squeal or anything seeming wrong but if I rev I'm getting boost but when it hits max it drops off and I get exhaust fumes out my radiator, any help or tests that I can do would be greatly appreciated I'm on a budget but if it comes down to it I'll pull it off the road until I can scrape enough coin to do turbo and head/ gasket if required but that'll take a long time to save

Link to comment
https://www.sau.com.au/forums/topic/452443-need-help-r34-engine-issue/
Share on other sites

Sorry should of been more specific the squeal was the split in the header tank and I did use brand new gaskets etc when fitting the turbo, I'm more looking for a test to work out wether the exhaust gasses are entering the cooling system from the head or internally in the turbo

Ask at Supercheap or Repco. Combustion Leak Tester.

You should be able to buy a kit that will tell you if there is Exhaust gasses in your coolant by the change of colour. (blue to yellow)

Instructions will be on the kit and should take less than 20 minutes.

You can also do a quick test by removing your radiator cap to see if your getting bubbles.

If so:

It will be the head/head gasket.

Edit: Not to say your Turbo isn't screwed also

Edited by Sinista32

I am getting bubbles in the radiator that's how I know that the exhaust is leaking I'm just confused as I thought the head/ head gasket would've allowed coolant into the oil or vice versa ill do a compression test and see what I get, do you know what it should be reading if the engine is within spec, and the only reason I'm suspecting turbo at all is because it's the only thing that's changed and is oil and water cooled so I thought there's a possibility that it could cause exhaust in coolant should a seal fail or housing crack, and because it idles fine but when I accelerate the boost guage hits 7 then drops straight to zero so stops boosting

I'm always surprised how people think a head gasket failing will always mix coolant and oil.

Looking at a gasket it's the least likely scenario. There's heaps of coolant galleries and not many for oil. So typically a blown gasket leaks coolant only.

For now the leak is small. Keep driving and you will eventualy see oil in the water. Second hand turbs never a good idea. As for turbo causing gasses in the radiator - no.

So there is no chance that the turbo cracked internally and is feeding exhaust gasses through the cooling section of the turbo out into the cooling system, and ill do compression test ASAP and post results, in order to keep driving the car ill have to get new radiator because too tank on radiator split open so it would've had to over pressurise the cooling system

I'm always surprised how people think a head gasket failing will always mix coolant and oil.

Looking at a gasket it's the least likely scenario. There's heaps of coolant galleries and not many for oil. So typically a blown gasket leaks coolant only.

I do understand what your saying but wouldn't you still likely get an overheating issue or smoke out the exhaust?

I do understand what your saying but wouldn't you still likely get an overheating issue or smoke out the exhaust?

No. It will overheat when it loses enough coolant. It only creates steam when a fair bit is going through. Small leaks don't show up easily.

That's why there are test kits available for checking for the precede of exhaust in the coolant.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...