Jump to content
SAU Community

Recommended Posts

Sydneykid from what i have read from other people that have used this ecu in their auto skylines, they havent had a problem with the ecu except for the gearchange to be a little jerky.

Yep, that's the problem I found in the one (and only one) I have driven. It was a bit annoying in that R33 GTST. But in a Stagea, towing a trailer with an R32 GTST on it, it may well be terrible. I don't know. :confused:

BTW abu, when your manual has done a 9, then you can sling off at R33 autos. Until then :wassup:

Hey MJ let us know when you get it done and how everything went.

The Map I sent you I got from Steve_SST and when I tested it on my GTST everything seemed to work fine other then it wouldn't idle properly. I found that gear changers were a little jerky but only from first to second all the other gears seemed fine.

I haven't got it properly installed as yet so mine just needs some fine tuneing just waiting to get some more parts together and do it all at once.

hey guys strutto and i put the ecu in today and its great. It was pretty damn easy to install, only had to run a vaccum hose from the engine to the ecu (for the map sensor) and then plug the ecu into the loom, after that we loaded the map to the ecu.

At first the car wouldnt idle. So we increased the richness by 15% and it idled great. We tried to lower the richness but the car wouldnt start then. But i have a feeling there is alot of caliberation that is meant to be setup to help with this, as we had trouble setting the air temperature and we didnt set the load caliberation table etc.

The car blows a bit of black smoke when it starts as its getting way too much fuel into it but that only lasts 2-3secs while the car is starting then when it idles it goes away. Im still reading how to over come this, as there are alot of fuel modifiers to play with.

The gears from 1-2 is jerky and then from 2-3 it seems to hold the gear much longer then the stock ecu and sometimes i have to take my foot off the accelerator for it to change to 3rd. I also have to push the accelerator further for it to downshift too. Apparently this can be fixed by running the TPS and Tacho singal from the ecu to the auto ecu. I havent tried this yet as it was getting late.

Performance wise the car runs like a rocket, when i floor it the car is very smooth through the rev range and pulls much harder then before. Im only running stock boost too as i havent sussed out the boost control yet.

So i still have alot to play with but its been great learning how it all works and im sure with more time and playing around with settings ill have those problems sorted. Then it will off to the dyno for a final tune :D

Im just hoping it will start tomorrow morning on a dead cold engine :)

Cheers

Matt

Good work MJ when you can get the $$ together i can't recommend highly enough getting it dynoed!! I just had a Link ECU installed on my auto (running a pod, FMIC, and a 3" exhaust from the turbo back and using the standard boost solenoid) last week. BEST MOD EVA!! I got just under a 40rwkw gain. They used a TPS to control the gear change and is smooth as!! Only drama I’ve got is its a bit more difficult to start takes longer to fire?? Apparently it’s to do with the map sensor i don't know weather you noticed that?

40kw gain id be stoked with that :)

Dyno tune will probably be next week depending how quickly i sort everything out. My car is hard to start now but that can be due to a number of things, the bosch fuel pump needs to be primed before it will start and i have to setup the fuel modifiers correctly. I hope the plugs dont get fouled from the rich starting.

Does anyone have a wiring diagram for the r33 auto ecu? I need to find out which wires are the TPS and rpm signal

Cheers

Matt

Good work MJ, Mine done the same thing with changing from 2 to 3 and also changing into overdrive a couple of times I had to let my foot of so it would change up, but it did run smother and went well, did you callibrate the TPS?

What MAP did you use?

I used the map steve sent me, the ignition maps were quite a bit different to yours. Have you got ur ecu in the car and completely tuned? So you did fix the gear changing problem by tapping into the TPS wire of the auto ecu?

I havent caliberated the TPS yet, where in the pc software do i do that?

The map I have is the one that Steve_SST sent me it hasn't been changed, I haven't gotten round to getting all done as yet. No I haven't tapped in to the TPS.

I'm not to sure where it is in the PC software I just do it with the Hand controller.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...