Jump to content
SAU Community

Midnight Purple Bnr34 Owners.

nism26

By nism26,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

nism26 Contributor

nism26

Posted
Posted

Hey guys.
So basically as the group says i would like to start a group dedicated to the purple BNR34 ( genuine only)

something simple like

Name (first name only, just for privacy )
State ( to see where the cars are and also to keep in contact with people from your with the same passion.
Photo of the car ( i am thinking no plates just for privacy, ultimately it is up to you )
and maybe even Modification ( not necessary but if you would like to share )

if admin approve , i would like to make it so you can sell your MNP parts only such as bumpers,guards and even the exclusive wheels that came out with them.

Link to comment
https://www.sau.com.au/forums/topic/453331-midnight-purple-bnr34-owners/
Share on other sites
vspeciinurburgring Apprentice

vspeciinurburgring

Posted
Posted

Hey guys.

So basically as the group says i would like to start a group dedicated to the purple BNR34 ( genuine only)

something simple like

Name (first name only, just for privacy )

State ( to see where the cars are and also to keep in contact with people from your with the same passion.

Photo of the car ( i am thinking no plates just for privacy, ultimately it is up to you )

and maybe even Modification ( not necessary but if you would like to share )

if admin approve , i would like to make it so you can sell your MNP parts only such as bumpers,guards and even the exclusive wheels that came out with them.

I think it's a good idea.

The specific mnp bits were limited to mnp3 only ( wingblade, wheels and another 1 or 2 things that i can't remember right now). These parts rarely ever come up and if they do they don't last long. I've seen one or two sets of the genuine MNP3 wheels come up for sale, but i have never seen a genuine wingblade ( for sale in Aus). With that said, If I had a midnight purple two BNR34 I would be trying to source the MNP3 wheels and wingblade as that would look mad. I know a certain 34 N1 owner on here who has a set currently.... :whistling:

nism26 Contributor

nism26

Posted
  • Author
Posted

Thanks for the support mate.

If the wheels currently have brand new tires I am very keen (for compliance reasons )

Also ,as my other other post was very vague I thought I would re do it

Mark

SA

MNP2 v-spec

At the moment Iam unsure of mods

Of the top of my head it has

Nismo cooler piping

Nismo intake piping

And a few other things

vspeciinurburgring Apprentice

vspeciinurburgring

Posted
Posted

Thanks for the support mate.

If the wheels currently have brand new tires I am very keen (for compliance reasons )

The mnp3 wheels don't belong to me, they are owned by another guy on this forum. I will link him to this thread.

MP2 is a great choice of colour by the way :thumbsup: .

nism26 Contributor

nism26

Posted
  • Author
Posted

The mnp3 wheels don't belong to me, they are owned by another guy on this forum. I will link him to this thread.

MP2 is a great choice of colour by the way :thumbsup: .

Sorry mate read it wrong.

If you could link him that would be much appreciated :)

Thanks mate , something different.

Don't know of any others in SA

Which was half the reason I started this forum ,hopefully I can find others .

GTR-N1 Grand Master

GTR-N1

Posted
Posted

Jason's reference:- Not selling just yet.

Terry-35_zps4480c0ef.jpg

But this is what they look like.

Terry-34_zps59647b6b.jpg

I think they look gorgeous, and they're well suited to the MNP colour. Did they come out in both MNP2 as well as MNP3?

  • Like 1
vspeciinurburgring Apprentice

vspeciinurburgring

Posted
Posted

Nice. They only came on midnight purple 3.

It's surprising how many Midnight purple 3 cars are sold without them and without the wingblade. Perhaps the owners are thinking that if they hold on to them for a few years, they can charge a pretty penny.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...