Jump to content
SAU Community

Recommended Posts

Hey all,


I've booked a lane for the drags at WSID on Sunday 22nd Feb. This is a weekend event as not everyone can make Wednesday nights.


Event page is here if interested so I can gauge numbers if interested!




Hope to see some new faces, I'll be covering the event when not racing.


More cars the merrier and have some friendly rivalries between the different types of cars :)

Link to comment
https://www.sau.com.au/forums/topic/453756-sunday-drags-day-2222015-wsid/
Share on other sites

Arr yes here is more info!

Competitors:

Competitor Gates open from 9:00am
Entry fee to Race YOUR Car or Bike on a real Drag Strip - $60
Scrutineering from 900am until 2.00pm (unless 220 vehicle quota filled before 2.00pm)
Racing from : 10:00am - 4:30pm approx.
Burnouts from : 4:30pm approx. (limited to 20 cars!!!)
NOTE: $25 for Burnout ONLY entrants!

Spectators:

ADULTS - $20

SHOW'nSHINE $20

FAMILY/GROUP - 2A + up to (x3) 12-16yo $50
KIDS 12-16 - $10
UNDER 12 FREE

Just let me know before the event so maybe by Saturday so I can tell them how many cars we should expect in our lane :)

My Media pass just got approved so hopefully get some good pics and vids :)



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...