Jump to content
SAU Community

Recommended Posts

Getting rid of some parts out of my Garage, starting to look like a wreckers.. prices are neg, will ship for smaller items

R32 GTR charcole canister $30

R32 GTR front mount intercooler (ding at the bottom) still works fine $60

RB26 metal head gasket (used but still good if your not fussy) $40

Standard R32 GTR intercooler piping kit (both sides, 4 pipes) though the first pipe from the turbo is a greddy hard pipe, not using it as i have a single turbo set up now $150

R32 GTR Bov cross over pipe $40

RB26 fuel rail and reg $40

Rb26 coil packs (started breaking down at 350ish RWKW) $50

Rb26 standard manifolds (good as a spare set if you wanna practice porting them out) $30

5x standard RB26 rods (come with pistons, thought wouldn't use them, good paper weights) $30 will sell separately

R32 GTR Front Diff centre $60

Bosch 70 amp alternator $50

cheapo brand Tyres, full set 18x35x245 (good for dyno or skid tyres) $80

OEM oil filter housing/cooler $30

Also have a full set of windage tray bolts

Theres probs more but ive forgotten, located sydney, contact for pics

PM is fine as i check the site reqularly,

  • 3 weeks later...
  • 2 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...