Jump to content
SAU Community

Recommended Posts

As above, it's in a half cut that I bought for the some body parts (damn that Ross stage in Tas!)

Haven't tested it yet, but it's complete with loom and computer so I'll compression test it this weekend to make sure it's all right.

$1300 either way. The cut is worth more, but it also means that I need to take it out of the bay, so call it even.

Basically I need the headlights and the front suspension, including hubs, arms etc, and maybe the front diff but the rest you can have.

Open to offers, can sell complete or short

Phone, PM or email any questions.

Link to comment
https://www.sau.com.au/forums/topic/45425-fs-rb20det-complete-with-at/
Share on other sites

Sorry no brakes. There are rotors, but I don't know what condition they are in.

Duncan still has a set of R32 GTR brakes off his car. You may want to speak with him.

Any reasonable offer on the motor will do. Depends on how much of it is wanted.

are there any differences between the RB20DET's in manual and automatic?

i need one for my car but its manual,

sorry, im pretty noob. but my RB20 is rooted and i dont know whether to get another RB20 or goto RB25 for my R32

No difference between engines for automatic or manual in pretty much any skylines. Sometimes diffs are different, but not an issue in this case. You will probably need to keep the sump off your existing engine as this one is a 4wd sump with the front diff attached.

RB25 is a more powerfull engine, but also much more expensive. Up to you which way you want to go.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
×
×
  • Create New...