Jump to content
SAU Community

Recommended Posts

Hi guys,

Keen to move this stuff so all parts nego. All have come off my 32gtr.

Consolidating in this thread so mods please delete others if theres an issue.

1. Speedy Holotype R Wheels (5x114.3, 17x8 +35) w/ Kumho (zetum) 235/45 tyres - $600

Wheels in excellent condition, no marks. Tyres have plenty of meat although bit of camberwear.

Square fitment

post-24058-0-08357400-1426043568_thumb.jpg

2. Nismo 600cc top feed, direct drop in injectors x6 - $450

Just got them back from being flow tested, cleaned and serviced. Two injectors are flowing slightly higher than the rest hence the cheap price (these retail for >$1k for a set of 6, replacements are ~$150 each). All are individually marked and bagged.

post-24058-0-49432300-1426043748_thumb.jpg

3. Nismo Front Pipes, suit BNR32. 60mm-in, 75mm-out. - $300

Flows fine at 300rwkw, perfect fitment and great quality. No dents or leaks, could use a polish if you like to look under the car.

post-24058-0-76506400-1426043960_thumb.jpgpost-24058-0-16555900-1426043979_thumb.jpg

4. Venom 3.5" high flow cat, brand new - $300

5" body, 100cpsi (most free flowing out there i believe). Direct bolt on for 32/33 as well as s-chassis cars. Comes with gaskets. selling as when I pulled my cat out i realised it was gutted so keeping as is.

post-24058-0-99415700-1426044183_thumb.jpgpost-24058-0-51039400-1426044231_thumb.jpg

5. Rb26 AFMs + Blitz intakes - $350

Working perfectly when removed, no plugs. OEM RB26 afms, car has 120,000km's on the clock.

post-24058-0-36020900-1426044365_thumb.jpg

6. HKS EVC3 electronic boost controller - $150

Just removed. Works perfectly. Has scramble boost, low/high boost settings, as well as auto learning.

[pics to come]

7. RB26 resistor pack (for injectors) - $100

Just removed. Needed if you want to go back to low impedence injectors (has both male and female connectors). Has been spray painted black in a previous life (along with pretty much the rest of my engine bay)

8. HKS Metal intake gasket kit, brand new - $110

Includes intake manifold and throttle body gaskets. Purchased but no longer needed

9. R32 boot trim/lining pieces - $15 each or take it all for $50

all in perfect cond. both side pieces, rear piece and the cover for the attessa pump.

post-24058-0-08861400-1426045382_thumb.jpgpost-24058-0-15625900-1426045437_thumb.jpgpost-24058-0-77484400-1426045461_thumb.jpgpost-24058-0-32104800-1426045489_thumb.jpg

10. LED Replacement bulbs for R32 Triple Gauge Cluster - $5 for a set (all 3), 3 available

Easy as swap to do, replace your now busted bulbs with bright, white LED ones. Gives a much more modern feel to the interior of the car. Will be putting up a DIY soon.

Located in Wollstonecraft NSW. Can post smaller items at buyers expense. Will also trade for items of interest (harness, steering wheel/boss kit, N1 vents etc.)

Cheers,

John - zero four 31 083 394

Edited by Jaeyon

Price drop on nismos to $400ono.

Will also separate AFMs and Blitz intakes - $150 for both intakes, $200 for both AFMs

Also have:

Apexi intake to suit rb26, selling as not needed. Purchased off forum member here just recently, was test fitted to his car for a week before being taken off. excellent condition and bolts straight up to stock and z32 afms. - $300 posted

  • 3 weeks later...

Also have hard intake kit -$80 post-24058-14290164424747_thumb.jpg

Nismo singleplate coppermix for r32gtr/r33 gtst push type boxes -$400. Comes with clutch cover, pressure plate, nismo flywheel and bolts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...