Jump to content
SAU Community

NISMO LMGT4 18x10.5+15 Wheels *new in box*


Recommended Posts

Selling my NISMO LMGT4 Omori/black edition wheels in 18x10.5+15 size. A genuine set of 4 that feature the machined/engraved NISMO logos (not stickers).

These wheels are basically brand new - never been fitted to a vehicle or even been out of their original NISMO/Rays boxes. Have only opened the boxes to inspect for imperfections when I purchased them brand new from a RAYS distributor. They still have their dust covers and factory tags on etc.

The plan was to fit them to my R33 GTR project car, but I am now selling that vehicle and so have no use for them. They are ideal size and offset for R32 (may need guard rolling?), R33 and R34 GTRs, and likely other Nissans that utilise the 5 x 114.3 stud pattern.

Located in south east Melbourne, prefer pick up but can post at buyer’s expense.

$5400 - not entertaining ridiculous offers.

Thanks

IMG_3311.thumb.jpeg.686036854c5ceff3387276d7b3da9d0a.jpeg


IMG_3310.thumb.jpeg.6ab5044369720ced1a9dfe84cf0faa74.jpeg

IMG_3309.thumb.jpeg.5af422ce09f4e2fa311e2ed0a2cfa57f.jpeg

IMG_3272.thumb.jpeg.629c0e8cc8cb600a0ac127ca2d7aadb4.jpeg

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • that is correct to be more precise, this sensor goes to a loom which contains only the flat blade single terminal (to connected to this sensor) and then the connector shown in my first post. This loom is tied up to one of engine hairness
    • This is really sad news to hear and it has taken me a few days to come to grips with the loss of Neil.  Neil was very straight forward and I have always respected his honesty and how he called it how it was.  He was a very knowledgeable man and was always available to provide advice when you needed help to solve a problem because he would have encountered the same issue in the past and could explain how he solved it.  Neil will be missed by many members of the Skyline family.
    • Dropped the car down to my mates shop on the 19th to get it on the dyno. Ran the motor in and dropped the running in oil and filter and filled it up with some engine oil.  Monday arvo I went down and we got a tune in her. Had a fun time trying to get it to hook up on the rollers. We end up having to roll into the throttle, reaching full throttle at around 6k. Made 23psi on gate then tapered off to 20psi up the top and spat out a healthy 700rwhp.  We had a slight voltage issue which was dropping ecu volts to around 11.8v so we called it quits and on Tuesday I went down and ran a couple of new power feeds to the ECU and DBW relays. Have yet to test it as we were trying to get things sent into the ECU from the TCU over CAN. We've now got oil temp, programme switch and gear position. Still working on gearbox speed, but have been told what to do so hopefully that will sort it. Once we've got speed working, we can start setting up the gear shift cuts and do some clutch adaptations in the TCU.  Should have the majority of it setup this week and go over the tune to see how it is now with the new power wire.  Was slack this time, didnt get any full runs as I was watching the TCU data on the laptop. Snapchat-322660241.mp4
    • Not until I googled it, now I remember lol. Seems like it's just to clean it up. But it doesn't stop the leak, I have a leak issue though? Thinking whether I need a new bottle, surely not lol.
×
×
  • Create New...