Jump to content
SAU Community

Hybrid intercooler kit Chrome plating coming off pipes


Recommended Posts

Guest darrinspencer

I have Hybrid FMIC kit on my 33gtst

I purchased last November thru the group buy on this site.

The chrome plating on the alloy pipework each side of the intercooler is bubbling and starting to come off.

Rang Powerdigger (Hybrid) in Sydney with not much help from them. Even though

the kit was directly mailed from them to me, their not real keen on any warranty.

Has anyone esle had this same problem?

Get a few people together and go back to them.

Other than that, get quotes from some places to fix the faulty work, and take that to them.

They will then fix the faulty work themselves, if they don't, take those quotes to the CCC (Consumer commission)

BASS OUT

I have the same problem. The chrome plating was starting to bubble up not one week after the piping was fitted. This will always be a problem even if they did get it re-chromed or gave you some new piping as the chrome plating will never bond firmly with the aluminium pipework.

Guest darrinspencer
Anodizing is Uber-cheap.

Shouldn't cost you more than $20 for the whole lot.

It will most probably be the minimum charge for the place that you go to.

Anodising is cheap to do, but it is only as good as the finish to start with, so the pipes will need to be polished first.

yeah wots the go with the 33 kits? I've got a hybrid kit on my 180 and its got cast pipes and their polished ... yeah cast is heavier and the heat properties are different but if they go to the effort to polish the cast why not jus polish the whole kit? would be cheaper than chroming wouldn't you think?

Darrin if you get them polished you can clear anodise them then they will never stain or go dull and its pretty cheap..... chrome by its properties never adheres to alloy that fantastic so im not suprised if they are alloy like you are all saying that this is happening.... plus it is probably crap chrome and crap preperation again if you wanted a really good chrome job on your pipes you would be paying 400-500 just for the chroming, so you are getting what you paid for.... a $100 chrome will be sh!t, and not last.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
    • Isn't there a PAR engineering gearset that has closer to stock ratios? And they claim they'll do whatever ratios you want.
×
×
  • Create New...