Jump to content
SAU Community

Recommended Posts


Show us your realistic game wheel!

The skyline has a full face npc clutch that is nearly on the floor (awesomeness for me) took him out to Belmont Park to practice for about a hour and a half the other week. When I got back in it was like a Honda!!!

The skyline has a full face npc clutch that is nearly on the floor (awesomeness for me) took him out to Belmont Park to practice for about a hour and a half the other week. When I got back in it was like a Honda!!!


I've got an exedy hypertwin. Would never get again unless dedicated race car. Its a strong yet stubborn POS


I've got an exedy hypertwin. Would never get again unless dedicated race car. Its a strong yet stubborn POS

Coolness, the npc has a bit of slip if you launch it hard in first but has great bite to chirp or spin second. When it's cold it's real close to the floor but warmed up you can pretty much nanna it round. I've got the idle set @900 which helps and stops juddering? Probably a bit high but seems to work the best on the nistune. I've always wondered about the twin plate?

Coolness, the npc has a bit of slip if you launch it hard in first but has great bite to chirp or spin second. When it's cold it's real close to the floor but warmed up you can pretty much nanna it round. I've got the idle set @900 which helps and stops juddering? Probably a bit high but seems to work the best on the nistune. I've always wondered about the twin plate?

Our xr8 has the standard high capacity single clutch with a six speed and a small child could drive it easily. ie: my wife. The Nissan has a short shifter so when I get in the Ford it's like driving a soggy lounge chair!
There is a 2-3mm slip window. Either side of that it's fully in or out. Can make taking off at the lights embarrassing if I'm up front

Rump rump bump bump blut blut whahhh, bruuuurt, Seeya later comonwhore and falcoon. I'd get the clutch right at the next lights but you've already lost once!
  • Like 1
There is a 2-3mm slip window. Either side of that it's fully in or out. Can make taking off at the lights embarrassing if I'm up front

Nothing worse than having to fly past a sv6 automatic at 70kph because you f**ked it and didn't think that anyone could be such a tool as to tell his missus we beat a skyline while he's looking at the tail lights:-( also hard to explain to the policeman why the tyres were spinning through the gears when you had to launch it hardO:)
There is a 2-3mm slip window. Either side of that it's fully in or out. Can make taking off at the lights embarrassing if I'm up front

That's what I tell the wife driving the Nissan. All on and all off. Treat it rough it drives smooth. Treat it smooth it drives rough. True story!!!
My npc clutch is pretty aggressive, kinda on or off. Makes for great laughs watching me kangaroo on the freeway in the mornings lol

Check out. Vietnamese uncle highway patrol. on you tube! Wished to post the link but couldn't work it out. Yourchonny YouTube channel. Funny as!
  • Like 1
My npc clutch is pretty aggressive, kinda on or off. Makes for great laughs watching me kangaroo on the freeway in the mornings lol

Nothing is funny when you have run a 8. Would love to check out the run. If you can send a link?



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...