Jump to content
SAU Community

Stagea 100k Service, Old Exceedy Clutch Issue.

nismad

By nismad,
in General Maintenance

 Share

Recommended Posts

nismad Collaborator

nismad

Posted
Posted (edited)

Hey guys, I've been away from the scene for a while and have recently got my self a C34 S2 Stagea RWD. It's coming up to it's 100k service so I would just like to know which sponsors are the cheapest/best for the following bits, I assume they do package deals?

  • Timing Belt & Water Pump Kit (Genuine Nissan Cam Seals, Genuine Nissan belt
  • Genuine Nissan R34 water pump
  • Genuine Nissan Timing Belt Stud Kit
  • Genuine Nissan Cam Cover Gasket Set
  • Genuine Nissan Ancillary Drive Belt Set
  • 1 tube of gasket maker stuff

I already have oil and oil filter, is there anything else I should be getting?

At the same time I'll also be doing a manual conversion from a R33 GTSt, I bought an Exedy clutch about 10 years ago that's never seen the road so I'll be using that, but the thrust bearing seemed to be noisy when it was fitted to my old car years ago. Can any of the older members (not long after SAU started), recall there being an issue with the Exedy clutches back then? I seem to recall it was a common issue and the fix was to get a standard OEM Nissan one. The part number of the clutch plate is NSD098U,

Edit The clutch it's self is silver and I thought that all Exedy clutches were pink?? The only part number stamped onto it is 2M05 which I can't find anywhere, so thought it might be an OEM one, will this clutch plate suit a standard OEM clutch? Confirmed mine was the non HD version which has the silver pressure plate.

Cheers,

Gareth.

Edited by nismad
nismad Collaborator

nismad

Posted
  • Author
Posted (edited)

Thanks for the heads up GH05T, I found an old post saying Kudos does kits, but couldn't find them in the classifieds, any chance you could send me a link?

Ben, I'll be doing the RMS as I have a slight leak, forgot to mention that in my post, but didn't know about the crank seal.

Cheers!

Edit, found Kudos! Ignore that :)

Edited by nismad
  • Like 1
GH05T Grand Master

GH05T

Posted
Posted

http://www.kudosmotorsports.com/catalog/genuine-nissan-pitwork-100000km-service-kit-water-pump-timing-belt-nissan-skyline-r34-25gtt-stagea-wc34-25txfour-rsfour-rsv-rb25det-neo-p-91.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...