Jump to content
SAU Community

Recommended Posts

Have two rb25 engines in pieces. Was going to rebuild into one good one but lost motivation. Parts are Ono.

Good rb25 head. Complete with cams, covers, cam gears (random adjustable intake gear) Bolt onto a 30 bottom end and away you go. $200

Average rb25 head. Gunky needs a clean and check. Comes with cams, no covers or gears $100

Rb25 block x 2. $50 each

Rb25 crank x 2. $50 each

S1 standard coilpacks with loom and brackets. $100

Rb25 sump x 2. $30 each

rb25 oil pump. $40

Rb20/25 exhaust manifold x 2. $50 each

rb25 inlet manifold. Complete minus injectors. $50

S2 rb25 arm. Worked great, upgraded to z32. $80

Rb20/5 cross over pipe with bob. $50 each

Turbosmart boost T $30

HKS SSQ bob. $30

Gktech s13 extended lower control arms. 9 mm longer over standard s13 arms complete and less than 500km use. Great for a track cars to get the extra track. $250

Gktech 4-5 stud 15mm conversion spacers. $80

Rb25 short shifter. $50

Hr31 weather shields. Awesome condition for their age. One slight crack in the plastic, clips still intact. $400 firm

Can get picks on request. Can post smaller items at buyers expense. Located in SA in the Adelaide hills.

Pie me for more info.

Cheers,

Adam

WP_20150530_001 77739.jpg

WP_20150620_003 77740.jpg

WP_20150629_007 77741.jpg

WP_20150712_011 148968.jpg

WP_20150712_012 148969.jpg

WP_20150712_013 148970.jpg

Hi, Adam

Will take the RB25 short shifter,pm u to get your bank details and postage cost to my workshop at Braeside Vic 3195

please call Alex 0433878905

  • 3 weeks later...
  • 5 months later...
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...