Stagea Big Wheels

[tomo123]

That M35 above is mine. Yes semi slicks are gone, replaced them with 245/35/20 on the 9.5 fronts and 275/30/20 on the 10.5 rears. Fronts have 25mm spacers to clear the brakes but still fit under the guard without a problem.

My rear tyres have around 3mm clearance to the plastic guard with camber around -1.5 (not sure haven't had an alignment lately). Non axis models don't have the plastic guards so may be different for you.

Depending on tyre size you could possible get a 19x11+10 to fit, but camber would be up a bit.

Also, just curious, which air setup did you get? And is your car RWD or AWD?

The 20's definitely fill the gaurds nicely. I'm not 100% sure on tire sizes yet but they'll most likely be 245-35-19 on the rears. The air struts are Airrex 350z ones and I'm using Accuair managment. The car is a RWD PM35 350RX Edited August 8, 2015 by tomo123

[-oliveR]

The 20's definitely fill the gaurds nicely. I'm not 100% sure on tire sizes yet but they'll most likely be 245-35-19 on the rears. The air struts are Airrex 350z ones and I'm using Accuair managment. The car is a RWD PM35 350RX

I have seen an M35 with the air struts from a 350z and they seem to fit fine. Mine is AWD so 350z struts won't fit. I have to look into the G35x model struts as they are the same apparently.

[zelda]

Just a heads up I run 245 45s on 18x10 15p rears on my s1 NM. Lips rolled out and about 10 mm pumping cleared it sweet. Hope this helps

[tomo123]

I have seen an M35 with the air struts from a 350z and they seem to fit fine. Mine is AWD so 350z struts won't fit. I have to look into the G35x model struts as they are the same apparently.

Great! That makes me happy knowing they're gonna fit pretty easily. You shouldn't have to much trouble finding struts to suit in the US.

Just a heads up I run 245 45s on 18x10 15p rears on my s1 NM. Lips rolled out and about 10 mm pumping cleared it sweet. Hope this helps

Thanks for the info, I'll definitely be getting the guards rolled and pumped as much as they can.

[BIGZED]

Just weighing in here, hers mine on the R35 GTR wheels as well, very similar alignment specs as above but without the autech/ARX over fenders and with 245/35/20 all round




Would be very keen to see 11j's under the rear, would look tops I rekon.


EDIT: Should mention, I'm the new owner of this one, now looks a bit worse, not on the 35's anymore, and different plates for down here in vic. Building some fat 19" weds for it ATM.

Edited August 15, 2015 by BIGZED

[tomo123]

Just weighing in here, hers mine on the R35 GTR wheels as well, very similar alignment specs as above but without the autech/ARX over fenders and with 245/35/20 all round

Would be very keen to see 11j's under the rear, would look tops I rekon.

EDIT: Should mention, I'm the new owner of this one, now looks a bit worse, not on the 35's anymore, and different plates for down here in vic. Building some fat 19" weds for it ATM.

Car looks great mate, definatelly post some pics of it when you get your weds. My stag is the same, doesn't have the over fenders. I'm sure you can fit 11's under the guards but the hard part for me is figuring out how low on the offset I can go while clearing big brakes.

[PranK]

Would love to see some more pics of the two stags with R35 wheels. They look seriously awesome!

[BIGZED]

Theres a few more pictures of it in this album: https://www.facebook.com/media/set/?set=a.859803384062543.1073741868.500247813351437&type=3

Not really a fan of whoring my car out too much as it stands there, its how I bought it and I feel it doesnt represent me all that much.





The Weds are sitting in my shed ATM, although theyve been put on the back burner for the moment as I'm building a new heart for her. Then just need to order lips and find tyres to suit and theyre on the car. Should be good though, final specs will be roughly 19x9.5 +20 fronts and 0ish rears, which should sit quite nicely with some camber I think?

[tomo123]

Nice pictures, can't wait to see the car with the new shoe's though.