Jump to content
SAU Community

Recommended Posts

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Interested in a Drivers side Seat Rail for gtr r32??.... I have a sparco Ultra seat will it sit at the same height i got one made up but no one else can sit in it besides me,,,Anyone taller there head hits the roof...

That wont be happening right???

Cheers

Price would be good though

ok rails just arrived and they look the goods. Just to clarify this is the whole frame and rails which will bolt to the floor plan and seems to be only for r31,r32,r33 not r34, as thats whats on the bride label.

I will try sneek out of work early today so i can take rails to fabrication shop and get them to price the drivers side up for me.

Getting my rails trial fitted to my car tomorrow so we know they will fit exactly.

Price looks to be around the $250 for the drivers side (Still to confirm). This is the whole assembly not just the rails.

bride%20seat%20rail.jpg

So confirm who would be interested for $250 for drivers side. If not many i wont bother getting em done, and will just put em in my car and be done with it.

R34 is different to the rest of the R series bolt ups for the seat rails.

I require a Bride Rail for the Drivers Side for R32/A31

Are you saying its $250 for a COPY of the bride rail? A Bride rail is $160 from a local online shop. How much did you pay for yours, and was it new or s/h?

JK

R34 is different to the rest of the R series bolt ups for the seat rails.

I require a Bride Rail for the Drivers Side for R32/A31

Are you saying its $250 for a COPY of the bride rail? A Bride rail is $160 from a local online shop. How much did you pay for yours, and was it new or s/h?

JK

If you can find 15 bride rails for a r31/r32/r33 please go ahead and take over my group buy!! But the simple fact is that there aint that many around.

So if anyone is interested left me know ASAP otherwise i will just forget about it and just get my seats finially installed today.

Update

Trial fitted the rails to the car and seat and the rials fit in perectly and sit the seat straight and at the exact right height. You may need to modify the bolt location slightly depending on ur seat tho.

So place ur interest if you want the drivers side or both.

I am getting 2 sets made up driver and passenger side for 2 friends next week, so if anyone wants some let me know so i can get em made in the same batch, or even after that as the jigs have already been setup for em

i got all excited about these, then realised they will only work with reclinable seat not fixed bucket :D

oh well i'll have to keep looking!

I dont see why they wouldnt work with a fixed back seat as the fixed back has nothing to do with the rails or how the seat bolts to the rails.

Most fixed back seats use side mounts, perhaps that is what he means.

With bolting side mounts onto a bottom mount rail you get the problem of jacking the seat up.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
×
×
  • Create New...