Jump to content
SAU Community

Happy Laps - Queensland Raceway 19-09-15

Cadmoon

By Cadmoon,
in Events

 Share

Recommended Posts

Cadmoon Grand Master

Cadmoon

Posted
  • Author
Posted

how dos this work if you are only allowed to do 120km hr? From the vidoes ive see on utube it looks like ppl are going faster?

QR rules say 120 max. Their insurance won't allow them to let us go any faster. If you've seen videos of people going faster in sure to can figure out why ;)

Feel free to pm me if you require further clarification.

Michael, can my brother drive his 180SX? Pay on the day obviously since it's tomorrow.

Sure, anyone is welcome in any car as long as it meets QR's standards.
Malakai Enthusiast

Malakai

Posted
Posted

It was a good laps session indeed. Pity we had to do the Clubman circuit and not the National. I really like the turn two and back straight combo to get a good head of steam going. I did get a little excited at one point and go for it forgetting that it was the Clubman layout, had to drive around turn three on my own like a potato.

Did anyone else double-up on Saturday and do the Roll Racing at night as well? I raced a few Skylines but not sure if it was anyone from here. I saw Noel but didn't recognise anyone else. Would have loved to race Noel's car just for shits and giggles.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      So I put it to 3bar (43.5psi) while priming. It stays at 43.5~ as I crank shakes slightly. Ive also tried dropping pressure to see if that changes anything. I replaced the fuel dampener because I was troubleshooting the system along with the stock FPR (swapping them one by one to rule them out). But i only got up to changing the dampener and it started running again. Injectors are stock second hand. I did a bench test on both my original ones and the secondhand ones. The second hand injectors I have in the car now spray slightly stronger than my original injectors.
    • MBS206
      Why am I hitting a power wall with my stroked RB25?

      By MBS206 · Posted

      I knew Andy from about then, it did some cool stuff. By 2005/2006 era, he also implemented closed loop ignition timing tuning. In 2004 it was pretty cool, being with him when he was doing automated fast self learning tuning!
    • WR33KD
      Why am I hitting a power wall with my stroked RB25?

      By WR33KD · Posted

      Im No tuner but…. im running a 25det with north of 600wkw at 9000rpm e85 and water meth. G40 1150 on 32psi. Having a real built head will flow a crap ton more power but you being stuck at 7600 won’t be helping at all, throw all the boost you can and nothing will happen. Solid lifter and 9000rpm is the only way,  I have built my motor 3 times, not from engine failure but more along the lines of my failures in not understanding engine parts better, basic phrase to help, “block hold power”  “head make power”   
    • Murray_Calavera
      Strange issue RB25DET wont start

      By Murray_Calavera · Posted

      What's the fuel pressure while the car is cranking? Curious, why did you replace the fuel damper? What injectors are you using, are they brand new?
    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      I think it's terrible value, it should be half that price IMO. And I'm known as someone who will unironically suggest the GTIII-SS on the RB26 if you have very specific requirements. The GCG RB25DET "hybrid turbo" is 1/3rd the cost of this GTIII-RS kit and sounds like it should fit with zero modifications. Talk to Hypergear as well, maybe they can do something that fits your requirements.
×
×
  • Create New...