Jump to content
SAU Community

Recommended Posts

Hello,

I am due to replace the o2 sensors in my 34 GTR and I have noticed that Nissan OEM have 2 sets of sensors available. These are as follows;

Front: 22690-24U00 / 22690-24U02

Rear: 22690-24U01 / 22690-24U03

From what I have found online, the first part numbers correspond to the 99-00 GTR whilst the second part numbers are for the 00-02 GTR.

Now I have a 1999 GTR and the second set of OEM parts are significantly cheaper (~$300 / sensor). Obviously I want to save money if I can, so can anyone please confirm that the later model sensors are 100% compatible with my car? From my own research they seem to be but I am after a definitive answer.

I did try searching this prior to posting but could not find my answer in the archives. Apologies if I have missed it.

Cheers,

John

Link to comment
https://www.sau.com.au/forums/topic/460334-r3334-gtr-o2-sensor-part-numbers/
Share on other sites

Hi Terry,

Thank you for your prompt response. I think however I did not convey my question properly. My actual query is;

22690-24U00 vs 22690-24U02 (both OEM front; later significantly cheaper)

22690-24U01 vs 22690-24U03 (both OEM rear; later significantly cheaper)

Are these parts interchangeable?

Which part numbers are you fitting to your N1? (if 34 that is)

Cheers,

John

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
×
×
  • Create New...