Jump to content
SAU Community

Recommended Posts

All parts in Sydney, off my 02 R34 GTR.

ASNU 1200cc injectors (at 4bar), done less than 3,000kms, look them up, these are the best you can get, stainless injectors, E85 safe, fits stock rail, flow matched, no smoke, genuine big injector, not flowed like others, a dream to tune - $700

NTK O2 sensors (for 33 and 34) - $80

Stock Airbox and Air Intake (snorkel) - $250

Stock Twin Turbo Pipe - $18

Stock AFM's - $100

Stock intercooler - $150

Stock intercooler and intake pipework - $80

Stock Front Pipe - $50

Stock Cams - $100

Stock Cam Gears - $50

Stock Washer Bottle - $20

Stock Fuel Rail - $50

Stock 2001 model struts and springs - $200

Samco blue silicone radiator hoses (top one used) - $30

Apexi 3.5" Rear Muffler, tapers inside a little, still pretty quiet down low, flanged, R34 GTR hangers - $150

Apexi 3" mid muffler with some flanges and pipework - $100

Autobahn88 100mm GTR intercooler (supported 430kw, one small dent) - $200

Tomei Z32 plugs - $20

Precision or non-bb turbo oil drain fitting - $25

post-66475-0-79892300-1448244750_thumb.jpg

post-66475-0-52622300-1448244751_thumb.jpg

post-66475-0-46343400-1448244752_thumb.jpg

post-66475-0-74994900-1448244752_thumb.jpg

post-66475-0-16443900-1448244753_thumb.jpg

post-66475-0-44668500-1448244753_thumb.jpg

post-66475-0-65550800-1448244753_thumb.jpg

post-66475-0-91152700-1448244753_thumb.jpg

post-66475-0-48208500-1448244754_thumb.jpg

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...