Jump to content
SAU Community

Rb26 400hp Drop In Package And Triple Plate Clutch

slidinr32gtr
 Share

Recommended Posts

slidinr32gtr Proficient

slidinr32gtr

Posted
Posted

Complete r32 rb26 engine with all accessories. Power steer pump, Ac pump and alternator. Engine has:

Long nose crank

N1 oil pump

Tomei adjustable cam gears

Tomei type a camshafts

Gates racing timing belt

Trust stainless manifold with external Tial wastegate 48mm

Sard 700cc injectors

High mount bush bearing turbo a/r 1.00 rear housing, 72mm rear wheel, 74mm front wheel, no shaft play at all has Braided lines

Awd sump and complete intake with plenum

Clear timing cover

Red wrinkle coated cam covers

Standard coil packs and harness

Included is the cooler piping from turbo to chassis pipe, dump pipe and catback exhaust to suit r32

All parts ready to drop in as a package. Engine compression tested 153-158psi across the board, has just been removed from a running/driving vehicle. Engine comes with warranty.

$6000

Exedy triple plate clutch, 3.92mm-3.92mm-4.04mm clutch disc thicknesses. Comes with throw out bearing in com good condition to suit, all only done a few thousand kms

$1000

Located Gold Coast can freight auswide

0414596256

post-44496-14492266257558_thumb.jpg

post-44496-14492269009809_thumb.jpgpost-44496-14492269259507_thumb.jpgpost-44496-14492269460601_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      After market rear camber arm adjustment

      By sonicii · Posted

      How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...