Jump to content
SAU Community

Rb20 In 180sx

EVL-180

By EVL-180,
in General Automotive Discussion

 Share

Recommended Posts

EVL-180 Apprentice

EVL-180

Posted
Posted

ok 1st yes im new to the forum and apparntly some uf you perth ppl will probably know the car that i am goin to be talkin about..... its a 1990 180SX with evl 180 on the numberplate.... got a problem or 2 or 3 not sure yet.... ok its got a RB 20 in it and its overheating like a little bitch a couple of people seem to think that its still got the standerd radiator in it and also apparnly when driving shavings of metal are comming from the exhaust maybe someone on here might be able to help if so it would be great

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/
Share on other sites
EVL-180 Apprentice

EVL-180

Posted
  • Author
Posted
EVL-180 if you have shavings of metal coming from the exhaust I'd guess..... blown turbo or parts of you catalytic converter. Either way seek mechanic pronto!!
ok shit thanx i had a feeling there was problems with the turbo apparntly there was flams about 20cm commin out of my exhaust as well if that says anything
Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-938634
Share on other sites
Nizman Mentor

Nizman

Posted
Posted

if you have a RB20 in a car not designed for it, your always going to have dramas

Example

The old RB30 in VL commys and R31 skyzerrs. In the R31 there wern't many heat related failures, but in the VL with its smaller air intake space between the headlights there we're many a cracked cylinder head due to overheating, mainly in the Turbo Calais. That was the in part due to GMH rushing to source a new engine for the VL after the death of the 202 Straight six back in the early 80's.

anyway....just go and get your cooling system pressure checked or whatever they do :D

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-938646
Share on other sites
EVL-180 Apprentice

EVL-180

Posted
  • Author
Posted

yeah spose thats true im just thinkin about converting it back to a SR20DET apparnly it has had a couple of them in it but due to the dumb ass who owned it b4 me managed to blow them up by usin a motec ECU but not re mappin the engin or somethin i dont know the story but apparntly he went threw a CA18DET and 5 SR20 DET's

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-938651
Share on other sites
sileighty Grand Master

sileighty

Posted
Posted

hey,

got a rb20det in my sil80 and had a few problems with overheating especially during the summer months and at night. i have found it to be the radiator problem as the older sr and ca's only have a single core radiator which is inadequate for the skyline engine. going to replace it soon with hopefully a gtr radiator or something more substantial. I have also fitted 2 thermofans on the front of the engine and later on will be removing the air conditioner condenser altogether and put in some ducting to keep the air on track to the radiator and it should be much better.

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-938697
Share on other sites
EVL-180 Apprentice

EVL-180

Posted
  • Author
Posted
Is it running thermos or a clutch fan ...

check to see if  the fans is doing its job :cheers:

Bein a bunbury guy u know patty prob.... well anyways me and him checked it all out the over heating problem is the water pump as for the thermo;s i have a wsich for it but it doesnt work.... dunno y its all connected

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-939863
Share on other sites
polishstorm Mentor

polishstorm

Posted
Posted

guys......your radiator is designed to keep you engine hot and at the right operating temp.....the key to keeping your motor cool is through the use of good quality oils....ie: less friction=less heat. obviously change you radiator to one that is meant for RB and then use good oils.

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-940701
Share on other sites
omp Collaborator

omp

Posted
Posted

When I converted my 180sx from CA to RB I actually upgraded the RB radiator. I heard after I started the conversion that there could be overheating drama's. So I took the RB radiator down to ARE and got them to fit the thickest core into the RB's tanks. I run a push-pull thermo fan setup. A 14inch thermo fan on the front pushes air through the air con condensor and a 10 inch thermo pulls the air through the radiator. I have never had a problem with mine, in fact I had to get a new thermostat as mine was stuck open and it took ages (5-6km's) for it to get to operating temp's! Upgrading the radiator cost me $450

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-966131
Share on other sites
Timd Community Regular

Timd

Posted
Posted

I was having overheating probs with the rb20det in my 280zx. Checked thermostat, flushed engine and radiator still overheated. Pulled the aircon condensor off(i dont use air con anyway, thats what t-tops are for!) problems solved. Air had to pass through the I/C and condensor before the radiator saw any of it. Still using stock zed radiator(to my knowlegde) and no probs. Thermos are still on the cards eventually

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-969729
Share on other sites
  • 3 weeks later...
  • 1 year later...
WhatBrake Collaborator

WhatBrake

Posted
Posted

Check the termostat, the radiator, the coolant could be crap as well. Failing those simple checks that can be achieved by one stop to supercheap auto and looking at the radiator. Ask your mechanic about it, and as ppl have said before have the right radiator thats adequate to keep the engine cool, could also utilise another fan if still happening. Dont go round thrashing your car non stop or it's gona overheat clearly also. Heat dissipation isn't the RB20's strong point...Buying a thrashed out car also isn't the best start, but hey.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/46182-rb20-in-180sx/#findComment-1618784
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...