Jump to content
SAU Community

Recommended Posts

Hi Im new to these forums, and as the R31 Skyline Club site is down for the time being (changing server it would seem) I was hoping some people on here will help me with some issues im currently having with regards to an upcoming regular servce.

1. Basically its ran up 193,000 kms on the clock and im getting woried about the timing belt. Had a look at it the other day and u can see light brown marks on the non-notch side of it, does this indicate wear?

2. Plugs. It needs em bad. NGK seems to be the general consensess, but what about the irdium ones....worth the extra money? (how much "extra" by the way havent been to autobarn yet)

3. The motor (RB30e stock running 20 degrees) is running like, well, not good under roughly 2 grand but then at 2000 grand u feel it really thump and it takes off (mainly first gear and second (manual), never do 2000rpm in third) its feels like its almost fuel related....filter maybe? Dont want to randomly replace parts i dont have to (uni student). Again it has never done this until a few days ago...also i know my air regulator is stuffed so would that cause that kind of problem?

If i even get one of these questions answered that would be bloody fantastic

Thanks in advance Luke.

Link to comment
https://www.sau.com.au/forums/topic/46221-techicnal-rb30e-running-issues/
Share on other sites

yea our r31 is around the 200,000km mark.

Belts -

The timing belt should be changed every 100,000kms but it will most likely last past 100,000 for a while depending on when you replaced the older one, but its best to replace it.

Im getting all the belts on mine changed, the power steering one is starting to fray and i think the timing belt isnt much better.

plugs - I would just buy the copper ones, they do just as good and they cost alot less but i think you get more kms out of the iridiums.

It would be a good idea to change the petrol filter. Its probably blocked up with shit, it will make a fair difference after you change from a bad filter to a new one.

Other things while your at it -

Perhaps change the air filter and clean the throttle body.

An oil + filter change if it needs one - some good quality mineral oil would be fine and its not to expensive.

Thats most of the stuff thats been done on my r31, but i still need to change all the radiator and heater hoses as they are getting crunchy and the radiator needs flushing. Plus i think the thermostat has stuck closed as the temp needle gets to high very often.

3. The motor (RB30e stock running 20 degrees) is running like, well, not good under roughly 2 grand but then at 2000 grand u feel it really thump and it takes off (mainly first gear and second (manual), never do 2000rpm in third) its feels like its almost fuel related....filter maybe? Dont want to randomly replace parts i dont have to (uni student). Again it has never done this until a few days ago...also i know my air regulator is stuffed so would that cause that kind of problem?

You might wanna check your air flow meter if you are having problems under 2000 rpm. Just a thought. This is what you might mean by air regulator. AFM's are not all that cheap, but can cause a heap of agro if they are on the blink. I agree with SKY-031, 20 degress is a bit on the high side if you are running standard unleaded. If you want to run PULP, 20 degrees is OK.

yeah ive been meaning to check the timing again for a while now, and after hearing it pinging 2day pulling up a steep hill, second and low rpms, so i took it home and checked it. To my suprise the timing was not at 20, but more like 13-14 degrees :) doh what else causes pinging? Or makes a softish *clink* *clink* *clink* sound under those driving conditions? Wasnt hot 2day either 10-12 degrees ambient temp...

Cazz....yeah I have already done extensive testing on the AFM, when i say air regulator i actaully mean air regulator :) its stuffed (sorry should have said that it was ok ::). Thanks for ur help anyway always appreciated :).

Thanks everyone for advice/help will 'report' back from service 2moro....hopefully my mechanic mate can shed more light on my issues

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...