Jump to content
SAU Community

Recommended Posts

Hi

My 1995 GTSt has developed an irregular idle of between 500 to 800 rpm.

At cold starts it idles fine above 1000rpm, however, after a minute or so , the above would start to happen.

Once it has been driven on the freeway for a some time and come to a stop, it will idle fine at 700 to 800rpm. Once warmed up, it has only a few times idled irregularly.

A review of same topics on this site have suggested to clean the AFM, clean AAC, clean idle control value , clean IAC & check for leaks.....thanks for your suggestions.

I have recently had a new AFM installed and it ran fine for months....so I do not think it is this and I have checked for leaks.

Can someone advice what AAC and IAC are abbrevations for? I can then look to clean them.

What I cannot work out is why sometimes it will idle fine and other times irregular??????? If something need cleaning, I would have thought the idle would be irregular all the time.

Would it be an electronic issue? What controls idle speed?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/462339-r33-idle-problem/
Share on other sites

AAC Auxiliary Air Control (Valve).

IAC Idle Air (Valve)

Used somewhat interchangeably. Not strictly the same thing depending on what car you're talking about. But close enough for our purposes here. IAC is the idle control valve which is driven by a solenoid from the ECU. It's on the back end of the plenum.

They get full of the usual black crud that you find elsewhere in the intake system. But in this case because it's a metering valve with small passages that is supposed to offer fine control of air flow, it matters if it is clean or cludged.

The valve is obviously able to open across a certain range of openings. If it is sticky in one spot but not another, then it may cause you trouble when it needs to be that far open, and will not cause trouble when it needs to be further open (or perhaps closed).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...