Jump to content
SAU Community

Recommended Posts

Hi All,

As promised here is a copy of my install notes. Water temp is external as I found the OEM sensor signal to skew when tapped.

Innovate LC-2 wide band is used for narrow band emulation and EMU autotune

Vehicle setup: VQ25DE OR VQ35DE

Speed pulse: TBA(think it was 16pulse, 21% correction)

If someone has spare time and wants to put this info in a neat spreadsheet please go ahead.

Matt

post-49288-14532520652612_thumb.jpgpost-49288-14532520809067_thumb.jpg

Edited by BoostdR
  • Like 3

I have the knock sensor connected however there is no pickup in the logs, even when I can hear the knock. Doesn't look like the EMU is compatible with the M35 sensor. Happy to be corrected

Which MAP sensor did you get? The Chinese version is very noisy on boost. I'll be changing mine as I run MAFLESS

I have the knock sensor connected however there is no pickup in the logs, even when I can hear the knock. Doesn't look like the EMU is compatible with the M35 sensor. Happy to be corrected

Which MAP sensor did you get? The Chinese version is very noisy on boost. I'll be changing mine as I run MAFLESS

No.71 on ECU pin is for knock sensor but i never try to test the signal.

i got genuine greddy map sensor from Japan with all other genuine harness, not chinese one.

ECU_PINOUTS 13_12_10.PDF

M35_CONNECTOR_PINOUTS.pdf

post-137368-0-65509300-1453258787_thumb.jpg

Nice. I'll be interested to see the log for the map sensor to see how stable it is on boost. I tee'd off the first fuel pressure reg feed for the smoothest signal. Still crap with my Chinese MAP. Moves up and down 4-6psi at 26psi.

Yes I have pin 71 for the knock sensor connected. Doesn't work for me. Tried most frequencies from 6-7khz

Here are the speed settings

Edited by BoostdR

Rev limiter moved to 7500. You need to change the rev limiter unit setting to duration whilst leaving the injection unit on % duty cycle so the autotune still works.

No more bouncing of the limiter when it doesn't want to change from first to second :))

http://youtu.be/JoqG6Fw10nc

900cc Bosch. E85

post-49288-1453775552236_thumb.jpg

Edited by BoostdR
  • Like 2
  • 4 weeks later...

Does CEL pop up with an emanage hooked up..?

Is the daughter board separate normally?

Also- what did you use your analogue output for?

If we tapped that into the throttle position, would it be possible to open loop that so the brake cut mod wouldn't be required?

Just throwing ideas.

Does CEL pop up with an emanage hooked up..?

Is the daughter board separate normally?

Also- what did you use your analogue output for?

If we tapped that into the throttle position, would it be possible to open loop that so the brake cut mod wouldn't be required?

Just throwing ideas.

for ignition daughter board, it is separate board as an optional part for EMU, to avoid ignition CEL.

Welcome. If anyone needs a emanage ultimate I have a spare one which also has the ignition daughter board which stops the check engine light.

i have EMU and daughter board, i am wondering if you can share some picture that how to plug the daughter board into EMU. :)

Welcome. If anyone needs a emanage ultimate I have a spare one which also has the ignition daughter board which stops the check engine light.

What's the go with the daughter board? I haven't heard of that before! Costs?

I picked up an EMU a few years ago, I found it again only recently - I really need to get around to getting it installed and finally tuned! Have you fitted one to anyone elses apart from yours? Would you like to? :P

What's the go with the daughter board? I haven't heard of that before! Costs?

I picked up an EMU a few years ago, I found it again only recently - I really need to get around to getting it installed and finally tuned! Have you fitted one to anyone elses apart from yours? Would you like to? :P

just a small patch board for EMU, RRP 1300YEN, quite cheap.

PN 15951500

i just took some pics:

post-137368-0-82342400-1456277877_thumb.jpg

post-137368-0-44541600-1456277881_thumb.jpg

post-137368-0-58979700-1456277890_thumb.jpg

post-137368-0-40449800-1456277894_thumb.jpg

post-137368-0-61721600-1456277897_thumb.jpg

post-137368-0-37838100-1456277898_thumb.jpg

Edited by YangLIU

What's the go with the daughter board? I haven't heard of that before! Costs?

I picked up an EMU a few years ago, I found it again only recently - I really need to get around to getting it installed and finally tuned! Have you fitted one to anyone elses apart from yours? Would you like to? :P

Yes. Also fitted one to a mates Stag. I'm pretty busy these days.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...