Jump to content
SAU Community

Recommended Posts

Thought id start a thread but its been a long journey with this build and its my second time around owning this car.

It started when i went to my engineer about putting a RB20DET in my old Gemini Coupe and there was a R32 GTR in his shop getting rebuilt and it just hit me...

Why dont i get a 33 keep it clean and standard looking but i wanted it to be the best with all the goodies..

After doing all my home work on the right car i decided a 33 was my choice.

I searched hi and low for the right one to build from scratch.

Found a 33 with a blown engine and only 101,000klm on it for 4k on gumtree and threw a offer of 2k at him and basically got told to f**k off lol..

A week later got a call back saying he would accept my offer but since he was a prick i said 1500 and he politely accepted so it was on the truck the next day and at my house.

I dont have any pics of it as i got it or through out the bar metal respray apart from when it was in primer as once i had it stripper to bare metal in the shed i was keen to paint it so i got to etching the car and finished at 12.30ish on a thursday night not even thinking about the 6 hour window to lay the primer down lol..

So i started priming and pulled a all nighter and back to work at 6 am for my 12 hour shift.

Im the process of painting i stepped on my phone a smashed the screen and when i got it replaced they factory reset my phone loosing all my pictures..

Heres the result of the car im primer

IMG_9432_zpsejw6ukyq.jpg

20140730_165642_zpsr8dhnrpz.jpg

20140730_171132_zpsczb3ulqm.jpg

While the engine was ripped out i sourced another engine and started to rebuild it.

Started with a billet crank and forged rods and pistons and the i had the mod bug.

I lashed out and got splitfire coils, tomei FPR, HICAS lock bar, bosch 044 pump, jecs 880cc injectors, greedy FF plenum, all new gaskets, N1 oil pump, 3 inch exhaust, hi flow cats, FMIC, timing belt, water pump, fully rebuild head, tomei pon cams, 6 core radiator and gave it to the mechanic to start assembly.

Got everything but the injectors put in assembled and back into the car running.. with in 10 minutes id found the clutch was stuffed and my turbo oil seal needed replacing so i ditched the turbo and bought a proboost T04z, Tial ext gate and Fabed a high mount manifold with as mate of mine.

20140730_172518_zpsgrgatwk2.jpg

20140816_165038_zpservtgrqt.jpg

20140816_165011_zpsyz5jpdgc.jpg

Now i was looking for a clutch but once again i scored a good deal and bought a rebuilt diff, GTR race spec flywheel, clutch and fully rebuild gearbox for a combo package of 3500 shipped to my mechanics shop and got it all assembled and running again to relise my suspension had seen better days..

I bought a set up upper and lower control arms, ball joints and blistein suspenision, new head and tails lights and back to assembly it went.

After 9 months into the build and about 22k out of pocket my misses fell pregnant to our first child.

I was determined to keep the 33 and she was happy for me to as she had a suitable family car already..

I started working 6 days a week and the 33 got neglected..

Finally i got it dynoed to make 836 HP at the rears and then i got a defect on the 3rd day..

So it sat in the shed for 9 more months untill we moved town and i needed a car for work so i sold it for a shocking price of 3800..

The guy who bought it sold the goodies and got it back on the road.

Then paint was layed over the primer and the result was this

IMG_2840_zps91a0l2cb.jpg 2016-03-15%2021.22.04_zps5p5hlkpb.jpg 20160326_112537_zpsvhx1vjdx.jpg 2016-03-15%2021.21.10_zpsrcxlczgn.jpg

After he spent another 5k or so into it i purchased it back for 8k with onlt 105,000klm on it and now iv put a hi flow on it and got it tuned to 321rwkw with 880cc injectors and a Power FC and its very street able. Hits full boost at 3300-3400 rpm and its a weapon..

Thanks for reading guys hope u enjoyed and get some encouragment and ill keep this thread updated as im still tinkering with it now..

Next mods will be a hypergear ss2 or a gtx3542r on a lowmount, tinted windows and im putting new carpet in..

Edited by donburtron
Link to comment
https://www.sau.com.au/forums/topic/463939-dons-33-gtst-build/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...