Jump to content
SAU Community

Help On Rb20 Nics To Eccs Head Swap.

flyingspudnik
 Share

Recommended Posts

flyingspudnik Newbie

flyingspudnik

Posted
Posted
I need to know what is required. Like, certain electronic connectors, physical connectors, and any vacuum lines.


I managed to get a BARE RB20 ECCS head for free for my NICS engine so I thought I would just swap it and it also allowed me to replace the head studs with ARP head studs.

Link to comment
https://www.sau.com.au/forums/topic/464961-help-on-rb20-nics-to-eccs-head-swap/
Share on other sites
flyingspudnik Newbie

flyingspudnik

Posted
  • Author
Posted

Maybe I should rephrase my question as I am now seeing how confusing it is. I currently have the ECCS head on the NICS Block but this shouldn't matter. SPECIFICALLY WHAT I NEED is how to hook up the (ECCS) intake manifold to the (ECCS) head I am also using an EBAY front facing plenum.

flyingspudnik Newbie

flyingspudnik

Posted
  • Author
Posted

I know jack about the red top but the intake was quite different & doesn't work, or doesn't work easily, I know where there's a good condition red top out of a z31 in NZ

thats not what im asking. Lets completely forget that I'm asking about the NICS and ECCS differences. I'm asking how can I hook up my bare ECCS RB20 Silvertop intake manifold to my RB20 ECCS Silvertop head. I'm doing more research and it looks like I'm needing an IACV valve, the underside coolant passages, I need to know about connectors and which ones I need.

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...