Jump to content
SAU Community

Alloy Sub Frame Inserts For Maximum Traction R34

camoo

By camoo,
in Suspension, braking and tyres

 Share

Recommended Posts

camoo Collaborator

camoo

Posted
Posted

Sub frame collar install into r34 for max squat. There are many threads but i have searched and cannot find instructions on where to put collars for max traction. Any one have any info?

Link to comment
Share on other sites
camoo Collaborator

camoo

Posted
  • Author
Posted

Thanks for the reply mate, i found that one on google. Is it the same principle for the alloy collars as the pine apples? The instructions talk about different size pineapples as though there are more than 2 options. The idea is simple, maybe im just looking to much into it

Link to comment
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Thanks for the reply mate, i found that one on google. Is it the same principle for the alloy collars as the pine apples? The instructions talk about different size pineapples as though there are more than 2 options. The idea is simple, maybe im just looking to much into it

Yep they don't replace the stock parts they are additional.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MrDose
      Nissan Skyline GTR R33 V-Spec Series 1 1995 w/Series 3 Goodies

      By MrDose · Posted

      Could you message me please. Cheers 
    • Dose Pipe Sutututu
      Fuel Filter replacement

      By Dose Pipe Sutututu · Posted

      Not fine enough, only good as a pre filter. You need like a 10 micron. FWIW I run a 40 micron pre filter then before the rail, there's a 10 micron (maybe finer, can't remember).
    • GTSBoy
      ER34 AT ECU and HKS SLD pins

      By GTSBoy · Posted

      OK, so. Look very closely at this. Here is a snip of the ECU diagram. Note that the VSS (Vehicle Speed Signal) input to the ECU is sent from the speedo head. The speed sensor on the gearbox (whether auto or manual) is connected to the speedo, and the speedo converts that AC voltage signal to a 0-5V DC PWM signal that the ECU reads. Pin 58 is NOT used by the ECU. It is used by the TCU. And unlike Duncan's thought on the matter, I would think that the only comparison done (by the TCU) would between trans output shaft speed and engine rpm. This so that the TCU can know whether the lockup converter is doing its thing, the clutches are managing shifts appropriately, etc etc. I would be willing to bet that the only speed signal you need to intercept with any speed cut defender, regardless of auto or manual transmission, would be the VSS into pin 29. That is the only speed signal available on a manual. And here is the rub. Your car is a manual. So why are we even having this conversation. There is NO speed signal input on pin 58 on your car right now and it runs just fine. That should tell you how important that pin is for your manual ECU.
    • Duncan
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By Duncan · Posted

      well, here's hoping it is off to a good home, looks like the new owner got a steal
    • robbo_rb180
      Rob's S Chassis track cars. Now with more s15 and less 180sx

      By robbo_rb180 · Posted

      That's the last time I'll see the 180sx. It's off to Victoria do keep an eye out for it down there. 
×
×
  • Create New...