Jump to content
SAU Community

Recommended Posts

Brand New In Box's (x6) Unopened.

NISMO ~ Getrag Transmission Conversion Kit - Super Coppermix Twin Kit - BNR32

 Part Number: 3000A-RR581-B1

Compatibility

  • Nissan Skyline GT-R BNR32 (Zenki - 8/89-8/91) Eng: RB26DETT
  • Nissan Skyline GT-R BNR32 (Chuki - 8/91-2/93) Eng: RB26DETT
  • Nissan Skyline GT-R BNR32 (Kouki - 2/93-12/94) Eng: RB26DETT

Included:

  •  - Getrag 6-speed transmission, standard on the NISSAN BNR34
  •  - Transfer case, NISSAN BNR34 Transfer Case
  •  - Front Propeller Shaft, NISSAN BNR34 Front Drive Shaft
  •  - Rear Propeller Shaft, NISMO BNR32/BCNR33 Rear Drive Shaft
  •  - NISMO Super COPPERMIX TWIN
  •  - Transmission cross member, NISSAN cross member from BNR34
  •  - Engine Mount, NISMO BNR34 reinforced transmission mount
  •  - Shift Knob, NISSAN BNR34 shift knob
  •  - Clutch Hose, NISMO Stainless mesh Clutch Hose
  •  - Oil, NISMO COMPETITION OIL type 2189E (75W140) 2L
  •  - Assembly Kit, Conversion Kit assembly parts

NOTES:

  •  - Transmission, shift bar & transfer case are delivered unassembled as separate parts.
  •  - Neutral/Reverse switch: Use the conversion harness included in the kit during installation.
  •  - Speed sensor cable:  The installation of a Getrag transmission does not affect the speed sensor cable.

Price:  $14,000 +/-

Location: Canberra

PM me if you’re genuinely interested/financial.

 

 

65008-2_2.jpg

65008-2_2.jpg

And why is this not going in your car?

 

*EDIT*

Just saw you are selling the car too :(

  • Like 1
9 minutes ago, Sinista32 said:

Cheers Damo

Transmission needs to sell first, otherwise it may still end up in S!N

No probs mate. Best of luck with it :)

  • Like 1

Honestly Daz I couldn't say either way for certain. Perhaps someone on here can confirm.

If not Check RHDjapan I'm sure it may give you a better idea also. Compare both conversion kits.

  • Like 1
Quote

 

Did a quick check Daz of RHDjapan. Different SKU and part number for the BNR32 and BNR33 kits.

However list of parts is identical. So no more informed than before.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...