Jump to content
SAU Community

Window Tint

ferni

By ferni,
in Victoria

 Share

Recommended Posts

mickr33 Community Regular

mickr33

Posted
Posted

Got mine done at Premier at Coburg. Paid 250 for good quality tint or you can get the 100 dollar stuff but not recommended. Did the back darker than the rest and was told this was perfectly leagal. Overall did a good job but the guy was a bit of a Know all.

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

i'm keen on some tint as well but i think i will give a couple of places around melb and see what i can during the week when i get some spare time, since i have been putting off getting the car tinted and the old tint removed for some time now. I have money atm but there is always something i can spend it on...sooner or later.

Guest r34gttblack

Guest r34gttblack

Posted
Posted

A quick question about tinting guys, what would you guys advise? 35% or 20% tint film?

I think the regulation in Vic is 35%, but how many ppl have done 20% and not had any issues with the cops?

Cops in Vic are just getting annoying for god sake. I have had my car for less than 2 mnths and already pulled over twice. Its a stock R34 for god sake.

GiJOr33 Experienced

GiJOr33

Posted
Posted

My skyline had ridiculous tint on the back and rear quarters. I couldn't see out at night so i had it removed and have got the F1 tint now, 35%... not dark enough. My Verada has some non F1 tint that's pimp style from the outside and you can still see out at night (although harder to see than the skyline). I wouldn't get F1 again... i got it for $200 (through a mate's work)... but for the normal price it costs i reckon it's a rip.

Andrew

INASNT Grand Master

INASNT

Posted
Posted
A quick question about tinting guys, what would you guys advise? 35% or 20% tint film?  

I think the regulation in Vic is 35%, but how many ppl have done 20% and not had any issues with the cops?  

Cops in Vic are just getting annoying for god sake.  I have had my car for less than 2 mnths and already pulled over twice.  Its a stock R34 for god sake.

20% on the back is alright, but on the sides aswell would be a pain in the night when driving and parking

Guest r34gttblack

Guest r34gttblack

Posted
Posted
20% on the back is alright, but on the sides aswell would be a pain in the night when driving and parking

Ah..cool. thanks man. I havent driven a car with 20% tint. I think i will get the 35% front and 20% at the back. The tint-man was saying that you can put 2x35% films and that will give me around 20% tint level.

Angry Proficient

Angry

Posted
Posted

i got mine on a sale special thru the tint professor in Nth Coburg just off gaffney street for 260.. usually 365 or somethin

however i did get a quote few months back from Premier for about 280 .. but it was a 100buck off special ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...