Jump to content
SAU Community

Cefiro headlights

PIMP_DAT

By PIMP_DAT,
in Four Door Family & Wagoneers

 Share

Recommended Posts

inark Grand Master

inark

Posted
Posted
well, if i had a cefiro first thing i would do is get rid of the yellow light (yuk! its the worst parts about s13's i think). So you could say turn that into your low beam.. then on the drivers side have a double high beam (2 round ones) and on pass side make the inner your high beam and outer the air intake. Would be good cos you would have the advantage of slightly stronger high beams, nice cold air and I cant see it as a defect .

hmmmmm good idea dave...

yeah i never liked the yellow lights either... altho mine doesnt seem to have them... they look white/clear.

so something like this?

wouldnt be too hard to rewire would it?

funkymonkey Grand Master

funkymonkey

Posted
Posted

owned a lancer vr whatever, that was givin everyone a race on springvale rd today... he was horrified that this stock looking family car had a turbo (coz you could hear it spool).

inark Grand Master

inark

Posted
Posted
owned a lancer vr whatever, that was givin everyone a race on springvale rd today... he was horrified that this stock looking family car had a turbo (coz you could hear it spool).

ok... thats nice and totally topic related :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • The Bogan
      SAU NSW - R U OK? Southern Highlands Cruise

      By The Bogan · Posted

      Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...