Jump to content
SAU Community

Recommended Posts

Hi Everybody!

Thought I'd start a build thread now I have some free time, hoping to get back on the wagon and fingers crossed this log will give me a bit of accountability as a bonus.

2016 was pretty hectic work wise for me and only really got to the gym about 1-2 times a week, the majority of the time was spent fatigued from work, coupled with a unhealthy grab food diet I finished off the year terribly out of shape from my usual physique.

I've been lifting pretty diligently for the last 15yrs until last year and the occasional injury along the way.

Bit of a disclaimer, there will most likely be a bit of bro science, random exercise names and possibly some nutritional info I've found fruitful throughout my experience.

Goals are to get back into shape size wise with minimal to moderate strength gains through structured training and gradual dieting.

Should look something like

87.5kg - 90kg Bodyweight, 10-15% Body Fat @ 178cm Tall

IMG_1483674611.557268.thumb.jpg.6f1356e6

Link to comment
https://www.sau.com.au/forums/topic/468486-destination-gainzville/
Share on other sites

I've had 2weeks pre training, just conditioning myself and getting a clear mindset and getting back into form/technique, took a week off for recovery as the only nutritional support available was shakes/supps. Then completed 1 more evolution of my programmed split at medium intensity and medium weight really focusing on ROM, eccentric and concentric contractions nothing special just trying to find where I'm at.

As of today I'm starting the ol' faithful diet, not really sure what people do these days I just go by the old math:
Pick a reasonable target weight, I'm 85kgs with a bit of extra timber for my liking, however I wish to gain muscle mass so I'll eat for 85kgs for 3-6weeks then adjust as required.

2g of Protein per Lbs of Body weight
2g of Carbs per Lbs of body weight
And I'll stick to approx 50-70g of fats for now.

85 x 2.2 = 187, 187 x 2 = 374

So daily meal plan is:
374g of Protien
374g of Carbs
50g - 70g of Fats

I get 104g of protein, 174g of Carbs and 10g of fats out of my 2 shakes every day(on waking and post workout) so minus that from my daily. Then I'll evenly distribute the remaining macros over the hours I'm awake by dividing the meals not exceeding 50g of Protein or Carbs. Works out I eat approx every 2hrs.

So day One was Yesterday, Chest and Back. All weight in Kgs. I use the striping method on Flat and Incline bench as I don't currently have a training partner. ie: On 3rd set I'll complete 4 reps at 110 then drop to 100 and 4th set complete 2-3reps then back to 100, depends how hairy it gets on the previous rep.

Flat Bench 10,8,6,4 - 100, 100, 110, 120
Incline Bench 10,8,6,4 - 80, 80, 90, 100
Cable Fly 3x15 - 6.25, 8.75, 8.75
Incline Cable fly 3x15 - 6.25, 8.75, 8.75

Heaves 4x10
Hammer Strength Close Grip Lat Pull Down 12, 10, 8, 6 - 40, 60, 80, 100
Rev Grip Bent over row 4x12 - 40, 50, 60, 70

Got Shoulders and Arms tonight, will update after sesh.

  • Like 1

Thanks L33SH.

Hi Birds,

Oh ok, I've honestly never heard of that one, it comes close enough to the maintaining muscle mass calculations that I was taught.

The rule of thumb that I've always known and practised has been:

Maintain/Shred - 1g per 1lbs 

Lean gains - 1.5g per 1lbs

Muscle Mass - 2g per 1lbs 

What was the target goal for the 2g per 1kg? Was it specific to a certain type of training/sport? I only ask as what I've been taught is all I've used and heard about for years in Body Building.

I've been away visiting family, so update. 

Shoulders and Arms.

Clean and Press 10,8,8,6 - 40, 45, 45, 50

Seated Dumbbell Lat Raise 4x8 - 7.5, 7.5, 10, 10

Dumbbell Shrugs 10,6,4 - 35, 37.5, 40

Dumbbell Rear Delt Fly's - 12.5, 12.5, 15, 15

Superset:

Barbell Curls 15,10,8,6,4 - 30, 35, 40, 45, 50

Cable Skull Crushers 15,10,8,6 - 23.75, 28.75, 33.75, 38.75

Only got through half the workout as the gym was closing, did minimal warming up, bit of a rookie error, Now I've got a tiny impingement in my shoulder with any overhead pressing. Will rest and monitor.

 

Legs

Same deal, ran out of time again ;( Missed my 24hr gym back home. Still had hyper extensions and abs to do. 

Squats 10,8,6,4 - 70, 90, 110, 120

Leg Press 15,10,8,6,4 - 140, 180, 220, 260, 300

Leg Ext 4 x 8 - 54, 68, 68, 82

Lying Hammy Curl 4 x 8 - 46, 60, 60, 74

Calf Raise 5 x 15 - 25, 35, 45, 55, 65

Stiff Leg Dead lift 10,6,4 - 70, 90, 110

Chest and Back

Bench 10,8,6,4 - 90, 100, 110, 120

Incline Bench 10,8,6,4 - 70, 80, 90, 100

Dumbbell Flys 10,8,6 - 20, 20, 22.5

Incline Cable Flys 3x15 - 6.25, 6.25, 6.25

Cable Pullover 3x15 - 21, 24.5, 28

Lat Pull Down 4x10 - 57, 77, 97, 117

T-Bar Row 3x10 - 80, 80, 80

 

Shoulders and Arms

Cut Shoulders away, during the warm up my shoulder was tender so just hit the essentials of arms.

Barbell Curls 15,10,8,6,4 - 30, 35, 40, 45, 50

Superset:

Seated Incline Dumbbell Curls 4x8 - 20, 20, 20, 20

Cable Tricep Kicks 4x8 - 10, 10, 10, 10

Superset:

Concentration Curls 4x8 - 15, 15, 17.5, 17.5

Rev. Grip Single Arm Tricep Pushdown 4x8 - 7.5, 10, 12.5, 15

Skipped Forearms due to lack of interest and being annoyed at my shoulder.

Legs

Did hack squats instead of Squats as all the racks were occupied, got a good pump so ill incorporate into every other leg day now.

Hack Squats 10, 8, 8, 6 - 60, 80, 100, 120

Leg Press 15, 10, 8, 6, 4 - 150, 190, 230, 270, 310

Leg Ext 4x8 - 61, 75, 89, 89

Lying Hammy Curl 20, 10, 8, 6 - 32, 46, 60, 60

Stiff Leg Deadlift 10, 6, 4 - 60, 80, 100

Superset:

Hyper Extentions 4x10

Standing Calf Raise 4 x 15 - 25, 35, 35, 35

 

REST DAY

 

Chest and Back

Flat Bench 10,8,6,4 - 100, 100, 110, 120

Incline Bench 10,8,6,4 - 80, 80, 90, 100

Cable Flys 3x15 - 6.25, 8.75, 8.75

Incline Cable Flys 3x15 - 6.25, 8.75, 8.75

Heaves 4x10

Close Grip Heaves 4x10

Rev Grip Bent over Rows 4x8-12 - 40, 50, 60, 70 

Forced REST DAY - Couldn't Walk ahaha

 

Shoulders Arms

Shoulder was still found to be tender however its really starting to lighten up, Should be 100% with another week :)

Still hit shoulders moderately but steered clear of pressing overhead.

Superset (SS):

Dumbbell Front Raise 4x8 - 12.5, 15, 15, 17.5

Seated Dumbbell Lat Raise 4x8 - 7.5, 7.5, 7.5, 7.5

SS:

Dumbbell Rear Delt Fly 4x8 - 15, 15, 17.5, 17.5

Dumbbell Shrugs 3x10 - 40, 40, 40

SS:

Standing Cable Rear Delt Flys 3x12 - 3.75, 3.75, 3.75

Standing Cable Lat Raises 3x12 - 3.75, 3.75, 3.75

SS:

Ezy Bar Curls 15,10,8,6,4 - 30, 35, 40, 45, 50

Cable Skull Crushers 15,10,8,6 - 28.75, 33.75, 38.75, 43.75

SS:

Standing Dumbbell Curls 4x8 - 17.5, 17.5, 17.5, 17.5

Tricep Pushdown 4x8 - 24.5, 28, 31.5, 35

SS:

Single Arm Cable Concentration Curls 4x8 - 6.25, 8.75, 11.25, 11.25

Cable Tricep Kick backs 4x12 - 6.25, 6.25, 6.25, 6.25

Forearms....... Skipped again..... Meh, ill get them one day.

Legs tonight!!!! 

Legs Done!

Squats 10,8,8,6 - 80, 100, 100, 120

Leg Press 15,10,8,6,4 - 160, 200, 240, 280, 320

Leg Ext. 4x8 - 68, 82, 82, 96

Lying Hammy Curls 20,10,8,6 - 32, 46, 60, 74

Tri Set:

Standing Calf Raise 3x12 - 25, 35, 45

Standing Single Leg Hammy Curl 3x12 - 5, 7.5, 10

Seated Calf Raise 3x12 - 20, 20, 20

 

Supplement Schedule is in full swing again:

Morning - 5g Creatine, 5g L-Glutamine with Shake on waking

With Meal 1(breaky) - 4,000mg Fish Oil, 2000mg Glucosamine, 1500mg Vitamin C, 1 multi vitamin

With Meal 3(lunch) - 4,000mg Fish Oil

Pre Workout - 5g Creatine, 5g L-Glutamine with what ever pre workout(using C4 atm, cheap and nasty)

Post Workout - Shake with 5g L-Glutamine

Before bed - Toss up between a meal or Casein protein with 5g of L-Glutamine(personally rather a meal then shake)

I offset any cortisol levels through BCAA's with an intra workout and any catabolic factors by a meal 45mins - 1hr before training coupled with the L-Glutamine pre and post workout if thats what you're wondering.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drive beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...