Jump to content
SAU Community

Recommended Posts

Hey guys im looking to buy a Nissan Skyline GTS-t in Melb. I want to do it by finance because of my work and stuff. umm wat id like is just some import yard dealers that u guys might know that do finance around Melb.

So far i got Kamikaze Motors, JSA on Bell Street and this one on 571-573 Victoria Street, Abbotsford Vic.

If you know any other places that do finance can u plz let me know.

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/46941-import-dealers-in-melb/
Share on other sites

hey crack how is your r33? had any probs with it? i went there today and the guy was really helpful. i talked to steve i think. anyway i think i found one i liked... so im going back there possibly on Wed to confirm with him if im gonna buy it or not. im 90% sure im gonna get it.

thanks for all your help. hehe im gonna be a proud skyline owner pretty soon :P

cheers

hey crack how is your r33? had any probs with it? i went there today and the guy was really helpful. i talked to steve i think. anyway i think i found one i liked... so im going back there possibly on Wed to confirm with him if im gonna buy it or not. im 90% sure im gonna get it.

thanks for all your help. hehe im gonna be a proud skyline owner pretty soon :P

cheers

no probs at all. which one you lookin' at? i was only there last week. they've got some aftermarket parts there. thery're also lookin at gettin a dyno soon.

i was looking at this white 1995 model. i like that one. the price is fairly good, its only the interest rate that is kinda high. like 12. something %

ive found a place on 517 victortia street, abbotsford. they will give me 9. something % rate but the car isnt as good quality as the one at kamikaze motors. (also the one at kamikaze has sunroof :P )

im gonna keep looking and try find some more. thanks again for all your help. greatly appreciated :)

I purchased my 94 R33 GTS25T from Best Choice Car Brokers on Williamstown Road. I found Mike's service to be exceptionally good, he had no Skylines in stock, but when I told him what I wanted, he sourced the car for me. He even brought the car down to Geelong for me to have a look at it, and then brought it down again when I purchased it. The car was an immaculate example and I have had no problems with it at all. Just my 2 cents worth!

check out:

Performance Jap Specialist

4B merri court, campbellfield

9357 0658

ask for Prassana and tell him that Warren with the blue R32 sent you

he has about 4 r33's in stock (along with 180's soarers and 300zx's) and is very reasonable priced. i'm not sure about finance but it can't hurt in asking him :D

there is always new cars coming in and he is very trustworthy (my brother bought his 300zx TT from him)

good luck!

Waz.

  • 1 year later...

i ve heard from a few people that Kamikaze sell dodgy cars to poeple. a few guys say that they sell damaged cars that have been repaired though if u look close enough u can c shitty resprays and even chasis damage on some.

Though i wanna c their cars myself as im looking to buy a new car and Kamikaze have a nice car that i like for sale. Im gonna take a very close look at the car and paintwork and get it checked out along with a good a test drive. Hopefully they r not the dodgy bastards like people say they r

any 1 else got any comments or experiences on Kamikaze?

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...