fikemoo Posted March 12, 2017 Share Posted March 12, 2017 Hello guys I know there are a few topics on this but no definite answer was given. I currently have a rb25 in my s13 on a r32 gtst crossmember and engine mounts and bonnet clearance is pretty tight as is. Now the rb30 engine is taller and will definitely fowl on the bonnet. Is the rb30 38mm taller or 30mm taller as I have been told both? And from the other topics I've seen the r32 crossmember is the lowest crossmember you can use. The problem I'm finding is if I lower the engine using the mounts the sump is going to fowl on the steering rack before I can get it low enough. Would using the s13 crossmember be better? Is it lower than a r32 one? Thankyou for any help that c an be given on this subject Mike Link to comment https://www.sau.com.au/forums/topic/469591-rb30-in-s13-crossmember-plus-a-few-questions/ Share on other sites More sharing options...
stealthfoz Posted March 13, 2017 Share Posted March 13, 2017 r32 engine brackets, cortina engine mounts Link to comment https://www.sau.com.au/forums/topic/469591-rb30-in-s13-crossmember-plus-a-few-questions/#findComment-7817233 Share on other sites More sharing options...
fikemoo Posted March 13, 2017 Author Share Posted March 13, 2017 (edited) 2 hours ago, stealthfoz said: r32 engine brackets, cortina engine mounts Hi thankyou for the reply I had seen this combination before. Do the engine mounts lower the engine that much then? As im already using the r32 stuff and didn't think the r32 engine mounts were that big to begin with. I also found this thread: https://www.driftworks.com/forum/threads/the-definitive-nissan-crossmember-thread.243198/ which was quite interesting and when it comes to the crossmember itself it would appear the r33 crossmember sits the lowest. But this doesn't take in to consideration the size of the engine mounts. Thanks again mike Edited March 13, 2017 by fikemoo Link to comment https://www.sau.com.au/forums/topic/469591-rb30-in-s13-crossmember-plus-a-few-questions/#findComment-7817265 Share on other sites More sharing options...
stealthfoz Posted March 13, 2017 Share Posted March 13, 2017 how much room are you chasing? when i did mine (5years ago so hard to remember) i thought r33 stuff sat engine forward and higher and r32 sat back and lower... either way i dont think there is a great deal in it. i ended up shortening engine brackets as i had 25/30 to get bonnet to clear Link to comment https://www.sau.com.au/forums/topic/469591-rb30-in-s13-crossmember-plus-a-few-questions/#findComment-7817349 Share on other sites More sharing options...
fikemoo Posted March 17, 2017 Author Share Posted March 17, 2017 Hi sorry for the delayed response I haven't been able to log in to sau on Tapatalk for some reason. I'm ideally looking to gain the extra height of the rb30 block. So atleast 38mm. The problem I'm finding is the sump will hit the steering rack before I can lower it the required ammount Link to comment https://www.sau.com.au/forums/topic/469591-rb30-in-s13-crossmember-plus-a-few-questions/#findComment-7818116 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now