Jump to content
SAU Community

S1.5 C34 stagea Part out.

rb26stagea
 Share

Recommended Posts

rb26stagea Grand Master

rb26stagea

Posted
Posted

Hi all, I have recently purchased a S1 RSFOUR that I'm starting to part out.

 

At this stage, I'm in the process everything I can, but leaving the car weatherproof and driveable, so I have some, but not all parts available...

 

I'll be able to provide the rest in around 2 weeks.

 

For reference, the drivers side weather strip is cactus, so don't bother asking...

 

The more interesting parts I have available at the moment are floor mats, rear cargo carpet mat, cargo net and privacy blind, and anything else that can be removed whilst leaving the car weatherproof and able to drive under its own power...

 

Also have currently available:

 

Factory exhaust,

Factory intercooler

Factory suspension

Lowered king springs

Factory sawaybars

Interior trims etc

 

Set of gmax 18x8.5 rims- rough as guts but good for skid wheels: 2 have minor buckles as far as I can see, but all hold tyre pressure... Hankook tyres on on all rims with some tread left, but they've been stored off the car, so I doubt they're serviceable, but feel free to make an offer...

 

Anything else just ask: hoping to start on the other parts on a week or 2 but need the car driveable til then: engine is healthy, has the optional Viscous LSD, bilstein shocks/unknown springs (rides really well) factory 16" rims etc...

 

Happy shopping!

Link to comment
https://www.sau.com.au/forums/topic/469961-s15-c34-stagea-part-out/
Share on other sites
  • 1 month later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • BASHERnissan
      TPS voltage RB25DET

      By BASHERnissan · Posted

      Hi guys my TPS voltage is reading over 2v at idle.  My Haltech ECU is reading around 40% throttle position at idle also which is really strange. Note the actual throttle position sensor is brand new…    anyone have any experience with this or know how to calibrate it on Haltech ? 
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      The OEM disk will not work on any AEM ECU, you need to use the one they made. You shouldn't have to flip the CAS or whatever you were describing, if you set the ignition sync offset correctly it can't backfire. Make sure you're using a spark plug lead on coil 1 instead of the timing loop to avoid weird issues with the timing light. Double check that your timing settings are actually correct, like is the 24 tooth configured correct or should it actually be 12 teeth for 1 crank revolution? I also found this: 305817248-AEM-Undocumented-Settings-v1-2.pdf    
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
×
×
  • Create New...