Jump to content
SAU Community

Recommended Posts

CP Pistons 86mm

Item: Used CP Pistons 86mm Set of 6 with wrist pins from a RB25DET

Model:

6MKRY9603X STD

RIB 0.10 XB

Compression: 8.5: 1 i believe 

Postage: Available 

Location: Goldcoast

Price: $600

 

THESE PISTONS ARE FOR RB25 ONLY, AND WILL NOT WORK IN RB26 ENGINES


CP Pistons is one of the most trusted names in the industry, and for good reason. Their extensive shelf catalog provides the user with many of the options that you'd normally be resigned to going to a custom piston for. Their standard offering already includes Dual Pin Oilers - providing double the amount of oil to the wrist pin, radiused valve relifs, and the pin fitting final hone on the wrist pin bore. They even include an Accumulator Groove as a standard option. This provides a small pocket for the combustion gasses to collect after the first ring, reducing ring flutter and providing a better seal allowing more downward force on the piston A.K.A. - make more power. All pistons come balanced within one gram, include pin lock grooves and wrist pins at no additional charge.

 

20170423_214044.jpg

20170423_214107.jpg

20170423_214226.jpg

20170423_214233.jpg

20170423_214251.jpg

20170423_214314.jpg

20170423_214349.jpg

Link to comment
https://www.sau.com.au/forums/topic/470383-cp-pistons-r33-exhaust-hankook-rs3/
Share on other sites

R33 exhaust

Unknown brand of exhaust, was off a RB25DET that made 600HP and sounds really nice, deep tone. 

Location: Goldcoast

Pickup: yes

Postage: arrange your own via e-go.com

Price: $50

20170423_214509.jpg

20170423_214619.jpg

Hankook RS3 Z222 265 35 18

New Hankook 265 35 18 RS3 tyres x2

Price $220 each

Pickup: Goldcoast

Postage: you can arrange with e-go


The Ventus R-S3 (Z222) is Hankook's Extreme Performance Summer tire developed for serious sports car, sports coupe and performance sedan enthusiasts looking for a race-minded street tire that can also meet the demands of autocross, drifting and track events. The Ventus R-S3 is designed to reduce the performance gap between street and track tires by significantly improving dry traction; however like all summer tires, it is not intended to be driven through snow, on ice or in near-freezing temperatures.

1rs3 Z222-500x500.jpg

r33.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...