Jump to content
SAU Community

Recommended Posts

R34GTT and Performance Parts Sale - Turbo/Gate/Manifold/Carbon/Exhausts etc etc

I have a heap of parts for sale to Suit R34GTT and other skylines... Most parts have been run on my R34GTT... Some are brand new and unused!

All parts currently located Newcastle area, Pick up at Tomago 2322  preferred during business hours Monday to Friday.

I will update this with more items when i get the time! Everything needs to clear as i need room and the cash for my new setup.

Here is a group shot of a lot of the parts listed below, i can take specific photos of certain items if requested - 

20170625_152937.thumb.jpg.93e2f995f5468b738431bf4b7971e28b.jpg

 

1) Full Forced Performance HTA 3076 Turbo kit with 6Boost manifold and Tial 44mm gate ***Turbo just rebuilt and AS NEW***

This turbo kit has been on my R34 since 2013 and has made a peak power of 524hp/391kw at the tyres on 28psi boost on a stock engine.

Package can include - 

HTA3076 turbo with 0.82 rear housing (Fresh rebuild 4 weeks ago with receipt for $680.00, turbo AS NEW)

Speedflow fittings and lines

6Boost T3 single scroll manifold

Tial 44mm MV-R wastegate (Needs to be checked)

3" Dump Pipe with plumb back and screamer option

Decat pipe

4 inch intake pipe and BMC air filter

Intercooler pipe with new silicon joiner

GFB Respons BOV with plumb back option

Will throw in one of the exhaust systems below if i get the price i want. May also separate the package, however the turbo will need to sell first before i consider the option. I have 3 interested in the 6Boost manifold already. The 6Boost has had a professional repair recently for a crack where the runner joins the collector, it is in used condition and working well.

Pics and info can be found here on page 110 and plenty of other pages - 

The current asking price for all of the above is $3250.00 and is a complete bolt on package. If this price is met i will offer one of the exhaust systems below to make it a whole bolt on package. Pick up only due to the size of the stuff. Off the car now and ready to go!

If the turbo is to sell seperately i want $1950.00 for it as it is basically new and a better option than the GTX version for RB engines. Look up the HTA thread for more info if needed... This turbo package makes a fair bit of power with good response! Its a lot of fun on the street and on the track! After this sells i will consider selling the other items, would prefer this goes as a package for someone though as its much better value and a whole lot less hassle for me!

 

2) R34GTT Carbon Boot Lid 

Brand new never used. Purchased from Just Jap (Have receipt somewhere). Trial fit on my car but wouldn't work with my wing setup without hacking it up, fitment was average at the bases but will suit drift or race cars as its super light! Sell Price $400.00ono (Paid $500-600 from memory).

19250341_1427044187365131_1161053733_o.thumb.jpg.983845131ff00d3206fe75cb9bd8c94d.jpg

3) HKS Super Dragger 3.5Inch exhaust.

Originally to suit 33GTST but modified the front section to fit R34GTT. The muffler has been removed and replaced with a straight pipe for race car/drift car application but can simply be changed back to street spec with a simple weld. This is 3" into 3.5" and has a great note too it! Was used on my race car which turned the muffler a goldy colour which looks awesome. Price $300.00.

20170625_152321.thumb.jpg.6dfda3c63d89dc7c02ddf00a09a72d9c.jpg

4) Apexi WS2 3" Catback exhaust system

This was the exhaust that ran on my car when i purchased it and stayed on for around 7 years! It was dead quiet but flowed enough to support the 390kw the car had at the time! It was extremely quiet but had a nice note on full throttle. The centre muffler has been removed to give it a little more sound but is supplied with the sale. Price $300.00

20170625_152306.thumb.jpg.e199bec0f0631dd8f2b0d7cdf0aaf71e.jpg

20170625_154748.thumb.jpg.19658d7286436870eeed42965a2bebb9.jpg

 

I have a heap of tyres and other junk i need to clear out ASAP! Will update the post soon!

Send me a PM if you have any questions or want to purchase the items above.

Cheers

Mat

 

  • Like 1

PM's replied.

Would prefer to sell turbo kit together! Lots of interest on the manifold and some on the turbo but would like to sell complete for now!

 

  • 5 months later...

Still for sale... Haven't had the time to bother trying to sell it all but now need to fund my new engine.

Whole turbo setup as listed above reduced to $2200.00 (basically the price of the rebuilt turbo alone) NO OFFERS on this now!

Carbon boot lid reduced to $350.00 (Will possibly use this in 2018 so not fussed if it sells).

On 16/12/2017 at 12:35 AM, sergi_dee said:

Inboxed

Replied mate!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This is what the look like normally. Except we only got the 2 doors locally
    • Back pressure is not really a function of the exhaust itself, but the turbine/housing. So the question/point remains valid. I would be fitting an EMAP tapping point and seeing what is going on in the exhaust manifold before committing to throwing boost at it. Flow. No intercooler is actually rated for continuous operation at any power level wrt temperatures, as they are no actually capable of shifting the required amounts of heat on a continuous basis. They get hot during a pul, then dump some of that heat into the external air (and some back into the internal air) during off load moments/periods). You probaby do need a bigger core, given the power level you're already at is somewhat above the "rating" of the cooler. Put pressure tapping points either side of the core (which possibly you already have, if you have a boost source near the compressor outlet and tapping near the throttle for existing purposes) and report on delta P across the core.   I haven't done the mass flow calculation to see where you would be sitting on the compressor map at the ~450is rwkW level we're talking here, but if you look just at the PR you're running at, which is ~2.8-2.9, then you have a really really wide swath of the compressor map to run in, and so long as you were making between about 45-75 lb/min of flow, you should have really good comp efficiency, with the ideal being betweem 55 and 65. I can't see the need to shift drastically on the map to get better results.
    • Welcome 🙂 The ER34 wheels and slight lowering suit the R33 sedan really well. I'm firmly in the 'keep it stock, at least on the outside' camp.
    • Do this, and we'll have a resource right here.
    • "Hybrid" is a meaningless term. I could not tell you what the vendor of that turbo means by "hybrid".
×
×
  • Create New...