Jump to content
SAU Community

Installing Side Skirts??? URGENT

Guest RedLineGTR

By Guest RedLineGTR,
in Exterior & Interior Styling

 Share

Recommended Posts

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

My R33 Gtst When it came over from Japan never came with side skirts and rear pods, very stockish I guess the full type-m body kit was an option...

My problem is that I have found some factory type-m side skirts but before I buy them I am wondering how the hell do you mount them??? Especially the side skirts?? Since I just had a look at the car and even underneath I can’t see any decent holding points.

Just need to know if anyone has removed their side skirts before:

How do they come off and how do you get them on??

How they actually mount the car??

Link to comment
https://www.sau.com.au/forums/topic/47159-installing-side-skirts-urgent/
Share on other sites
Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

Thanks for the quick reply. Here are some pics I have found of the factory side skirts. But I’ll still going to see the side skirts in the flesh to make up my mind before I buy them. Not that keen on drilling holes into the body :(

Hope to get some more feedback from people :)

Thanks For your Time. Rob

benm Grand Master

benm

Posted
Posted

Yup you can see the 2 bolt holes either end, plus maybe 2 bolts along the middle on the inside and its done.

Just pay the money and get it done professionally is my only advice, even if you have to wait an extra month to get it done :)

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted
Yup you can see the 2 bolt holes either end, plus maybe 2 bolts along the middle on the inside and its done.

Just pay the money and get it done professionally is my only advice, even if you have to wait an extra month to get it done :)

Yah i'll see how it goes, since i know i have holes for bolts near the front guard but nothing on the rear knore on the bottom. Maybe i'll use double sided tape :) j/k I"ll just have to wait and see :(

Greg Veteran

Greg

Posted
Posted

Rob,

From the factory they attach with a series of clips into the door sill and 2 screws at either and.

I was in the same position as you, car had no skirts when I imported. I glued my skirts along the door sill (its easier, less fiddly and just as strong) and screwed at either end.

Hope this helps

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

Life savers :rolleyes: sweet thanks for the info. If they just clip on and bolt on thats sweet saves me trying to get them into my car i can just clip them on!! on the spot too :rofl: saves them sticking out the windows. Thanks Again. Will let you guys know how i go tomorrow will be picking up some freshly paint sideskirts and rear pods for a good price.

Cheers Rob :D

Greg Veteran

Greg

Posted
Posted

No you have misunderstood, sorry. Since your car did not have skirts from the factory it doesn't have the holes to clip onto. You need to drill these holes and put a plug into the holes, which a clip will then clip into. The alternative is to glue them, and not drill any holes, which is easier :rolleyes:

Guest RedLineGTR

Guest RedLineGTR

Posted
Posted

Ah...that makes it clearer..cos i remember somewhere i saw a photo of all these clips/plugs on the side of the car when a sideskirt was removed and i wasn't sure if it was those. Hmmm dont know if i want to glue them. if the screws hold them in place half decently i'd rather use double sided tape since if i do intend to remove them sometime i wont loose half my paint from the glue :rolleyes: or i just might decide that i dont want to bother with them.

NuGGeT Proficient

NuGGeT

Posted
Posted

sideskirts are easy as to install and so are rear pods. if your car has mud guards there gonna have to come off. and u just use those holes. and then on the rear of the side skirts your gonna have to drill new holes to fit them. also by some stuff called sikaflex from most car stores and put a few dots on the top of the skirts to hold them in place

SRW-1 Explorer

SRW-1

Posted
Posted

Yeah i was told to use sikoflex as well as drilling two holes or so to mount the sideskirts. As for the pods- if they're fibreglass copies taken from a mould may be a bit of mucking around, especially pressing the lip part up and around the rear bar. I used tiny plugs to hold that curving part in, but my car is black so can easily get away with it. The end result looks really neat and professional, but there was a bit of mucking around involved. Otherwise just take it down and get someone else to do it!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I refreshed the OEM injectors with the kit and connected it up. It now ideals okay even with the IACV removed. Driving still has the same cutoff issue like the 550cc injectors so the issue is somewhere else. I bought FPG's Fuel Pump Hanger. I will be installing it next, but it is not as straightforward as I thought it was with my limited wiring knowledge and no instruction on the specific model I purchased (FPG-089). I also got the incorrect billet clamp as I could not find info on the OEM sizing.
×
×
  • Create New...