Jump to content
SAU Community

Recommended Posts

Stock fuel lines capacity

Hi there everyone,

I'm blowing my brains out with this thought and might want some feedback if it might be possible or if I'm just crazy.

 

So my question is the following.. how far can you go with the stock fuel lines on hp figures? And how does that work in relation when you are doing drag racing or let's say skids/drifting on the road..?? I do believe there might be air pockets in the fuel lines while doing skids, is this applicable on drag racing as well? 

The reason I'm asking is because I hear allot that the fuel in our tanks might swirl all around creating air pockets and eventually lead to leaning out or even worst. I currently have two pistons that are toasted and was wondering if this might have happened to me.

 I have a R33 And my fuel lines are as following..  Where  The rubber factory lines start from the firewall I had all those lines removed and used -6 AN nylon braided lines to feed the fuel rail as well as to the return etc.

My current setup is a precision 6262 BB turbo. Ems stinger Ecu, aeromotive 340 lph fuel pump with 630 cc top feed injectors. Side mounth intake. Stock rotating assembly.

Setup is tunned to be rich at top load due to bad pump gas octane at my place, AFR  is between 11.4 -11.8 on load.

if any body can help with feedback on how far they went on stock lines what setup running and also opinions and beliefs behind the fuel surge scene.

 

thanks 

 

Kevin 

 

 

Link to comment
https://www.sau.com.au/forums/topic/471655-stock-fuel-lines-capacity/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...