Jump to content
SAU Community

Recommended Posts

Hard to get in 3rd gear when lose traction on 2nd gear. r34 gtr

Hi. I got this change gear problem from my last happy lap.

My car is 660hp r34 gtr, I lose traction badly everytime when I floor it on 2nd gear from 5000rpm. At the same time the gear stick shaking very bad.  It's AWD OMG:(

The gear shift and car drive all good normally but if I floor it 2nd to 3rd is hard to get in gear and sometime I miss shift to 5. I know it's about my skill. But it's really hard get the right position when the gear stick shake like crazy. 

I already got nismo engine and gearbox mount.  So my question is what I can do to make the gear stick stable on 2nd gear? And it wasn't that bad before maybe I got bad traction this time?

i think change better tyre will help (I have nitto invo)any other idea?

 

 

Axle tramp occurs when the combination of spring + damper + tyre sidewall stiffness + tyre grip + bush deflection + chassis twist all add up to cause the rear suspension to compress as the tyre grips under power and then as the tyre reaches the point of breaking traction the sudden reduction in compressive force in the suspension causes it to pogo upwards.  As it comes back down it loads the tyre over and above the load it gets just from weight + torque reaction, increasing grip.  So it hooks up, loading the suspension more until it pogos again.  Rinse and repeat.

The R32 rear end is particularly prone to it due to the geometry.  The 33s and 34s less so, but they're not immune.  2 cars that seem to be set up identical will have one do it while the other one doesn't.

It ultimately comes down to springs and dampers, getting them right.  If really stiff then it never grips properly and just breaks traction.  If really soft, it compresses heaps and doesn't rebound (drag style).  Somewhere in the middle is better performance overall, but also somewhere in the middle is axle tramp territory.  And then all those other factors I listed at the top stick their beaks in too.

Fixing it is hard.  My car axle tramps like a bitch and I've never been able to fix it, through 3 different sets of dampers and springs.  Different tyres have affected it more than anything else.

thank

4 minutes ago, GTSBoy said:

Axle tramp occurs when the combination of spring + damper + tyre sidewall stiffness + tyre grip + bush deflection + chassis twist all add up to cause the rear suspension to compress as the tyre grips under power and then as the tyre reaches the point of breaking traction the sudden reduction in compressive force in the suspension causes it to pogo upwards.  As it comes back down it loads the tyre over and above the load it gets just from weight + torque reaction, increasing grip.  So it hooks up, loading the suspension more until it pogos again.  Rinse and repeat.

The R32 rear end is particularly prone to it due to the geometry.  The 33s and 34s less so, but they're not immune.  2 cars that seem to be set up identical will have one do it while the other one doesn't.

It ultimately comes down to springs and dampers, getting them right.  If really stiff then it never grips properly and just breaks traction.  If really soft, it compresses heaps and doesn't rebound (drag style).  Somewhere in the middle is better performance overall, but also somewhere in the middle is axle tramp territory.  And then all those other factors I listed at the top stick their beaks in too.

Fixing it is hard.  My car axle tramps like a bitch and I've never been able to fix it, through 3 different sets of dampers and springs.  Different tyres have affected it more than anything else.

great info!! thanks a lot! i will get the suspension checked one day, but i don't think anything wrong with it. if they are all good, I will get better tire, but i worried some better tire will make it even worse.  because the day without too much axle tramp the tire feel normal, but the day with a lot axle tramp the tire feel a little sticky. both day i run same setup. 

maybe some really sticky tire will fix this problem. 

 

I don't really feel the car shake  , but the gear knob shake badly. i just worried i will damage the gearbox one day cause the axle tramp:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...