Jump to content
SAU Community

Recommended Posts

Almost all of them don't work, or work in a very limited way. Our systems are Canbus, not true OBDII, and even many mechanics have trouble getting readers to read our cars :(

 

There is a certain chipset that you need to have to even have a chance for an OBD reader to speak with our cars, but I am not sure what it is. Maybe others on here have gotten one to work?

try nissandatascan.com  The software works with our cars and they have a list of suitable adaptors on the page.

Otherwise, buy a consult 2 clone from china.  but you will need a windows xp laptop to run it.

Thanks guys, I will check that out.
Maybe 32 bit Windows 7 will work too.
I saw this online, an adaptor for the Nissan port to OBD2
https://www.ebay.com.au/itm/14-Pin-Male-to-OBD2-Female-16-Pin-Car-Diagnostic-Tool-Adapter-Cable-or-Nissan/282715072597?epid=3008354291&hash=item41d321a855:g:4Y4AAOSwnw9Z9rsr

Edited by Roger Overson

Hi mate, 

Get an elm327 Bluetooth OBD2 dongle (10-20 on eBay, watch out for fakes).

Download NDS2 (II) for android. There is a free version (ads) and paid( no ads). This is a direct port from consult 2+. If you have ever seen consult 2, you will see its a massive improvement!!!

I got my v35 last week and works a treat, pulls all data and dtcs as per the nissan esm (fairly sure, I've only had knock sensor codes so far).

 

Let me know if you want more info or a PIC of my dongle (heh)

Edited by andys14
On 3/2/2018 at 3:28 PM, Roger Overson said:

Hard to tell. They are a hit and miss. I bought 3 one worked

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...