Jump to content
SAU Community

Recommended Posts

44 minutes ago, Blackgtr said:

Very impressive. I know that with modern single turbos, more power can be made but some people enjoy the factory twin turbo sleeper look; im one of them.

Your figure is a perfect number for daily and track days; also the occasional spirited twisties. 

Was there any cam gear adjustment?

I dont think so but it might need it does run a bit lumpy on idle. Ye its plenty power for track now, any more and I will need a big brake kit. I just ordered some pfc rotors for front and some pfc 11 pads all round. I have Pfc uprades on my M3 and its so good with stock calipers.

Edited by DD-GTR
11 hours ago, DD-GTR said:

I dont think so but it might need it does run a bit lumpy on idle. Ye its plenty power for track now, any more and I will need a big brake kit. I just ordered some pfc rotors for front and some pfc 11 pads all round. I have Pfc uprades on my M3 and its so good with stock calipers.

Lumpy idle. Yeah its probably the cams. I saw just yesterday a blue gtr with tomei cams and e85. It was very lumpy on cold start and idle. Some cam gear adjustment will help shift the powerbank; great for an upgraded turbo rb26, especially on slower corners and on the street.

The car looks great, i had an r33 gts4 a long time ago and ive always loved the r33 gtr. Definitely put a stock rear bumper on, we are over the whole bling bling bodykits. Oem is king now. 

30 minutes ago, Blackgtr said:

Lumpy idle. Yeah its probably the cams. I saw just yesterday a blue gtr with tomei cams and e85. It was very lumpy on cold start and idle. Some cam gear adjustment will help shift the powerbank; great for an upgraded turbo rb26, especially on slower corners and on the street.

The car looks great, i had an r33 gts4 a long time ago and ive always loved the r33 gtr. Definitely put a stock rear bumper on, we are over the whole bling bling bodykits. Oem is king now. 

Ye ok. Will get the cams looked into. Im going to collect a black rear bumper tomorrow. $20

I read that  the gtst and gtr are the same rear bumper so it should fit.

Cheers

On 20/03/2018 at 6:37 PM, DD-GTR said:

It would be a lot better if the hackers cracked the TCU software so that it could be improved but nobody has managed it yet.

 

Pretty sure TMR can do this. I was down there this morning and he mentioned something about it.

Possibly getting my EVO X SST repaired/fixed.

19 minutes ago, DD-GTR said:

Cool. Let me know how you get on. 

Mine is more of fixing a slipping issue and possible replacing of clutch packs. $5 to $6k exercise.

 

But if you have a specific question i can ask next time i chat to him next week.

 

45 minutes ago, blah_blah said:

Mine is more of fixing a slipping issue and possible replacing of clutch packs. $5 to $6k exercise.

 

But if you have a specific question i can ask next time i chat to him next week.

 

Ye I had slipping in mine too so I installed new Viton seals and SSP 600HP rated clutch packs. Mine shifts hard and fast in supersport mode but still slips slightly in normal and sport. Afaik nobody has cracked the TCU software so the slipping in normal and sport cant be improved on too much so I always drive in supersport with paddles.

On 24/03/2018 at 3:16 PM, DD-GTR said:

Ye I had slipping in mine too so I installed new Viton seals and SSP 600HP rated clutch packs. Mine shifts hard and fast in supersport mode but still slips slightly in normal and sport. Afaik nobody has cracked the TCU software so the slipping in normal and sport cant be improved on too much so I always drive in supersport with paddles.

I spoke to Dan this morning and yes TMR can crack the TCU software. Speak to Dan McCoey he is very knowledgeble.

If you speak to him this week tell him Tony referred you he is working on my car as we speak.

 

Appears to be a SST tunning issue which no other major workshop has picked up on. And im talking a 'few' specialist Evo workshops.

3 minutes ago, blah_blah said:

I spoke to Dan this morning and yes TMR can crack the TCU software. Speak to Dan McCoey he is very knowledgeble.

If you speak to him this week tell him Tony referred you he is working on my car as we speak.

 

Appears to be a SST tunning issue which no other major workshop has picked up on. And im talking a 'few' specialist Evo workshops.

Wow thats huge news. People all over the world have been trying to crack it since 2008. I knew they could control some SST tables but to have full control of the TCU will help performance a lot.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...