Jump to content
SAU Community

  

41 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

G'day guys,

I just had my HKS Super Dragger exhaust from the cat back installed today. And while I'm stoked on the how it sounds etc, I am extremely conscious of the fact that it's going to land me into trouble.

Where to start, I guess firstly yeah, I came from a stock exhaust so anything aftermarket is going to be shock to the system. Is it too loud?? Well, it would probably pass EPA as this is one of the "quieter" exhausts on the market, but it does have a droney taste to it, especially around the 2000rpm mark.

However, what I am more conscious of, is the fact that my car is also lowered. Lowered, making the exhaust around the centre of the car, go below the 100mm ride height limit. Combined by the fact that it has a massive 5 inch "cop bait" tip, I know its going to draw unwanted attention, which will invariably lead to a defect notice..... *sigh*

So what should I do, keep it, and enjoy the noise, power etc, or revert back to stock, and remain hassle free from the cops (if that is at all possible)

Oh yeah, does anyone want a HKS exhaust........ barely used!! :)

What would you guys do???

i passed up on a super dragger due to the size of the barrel

it wasnt so much cops i was worried about, it was catching it on my driveway, speedbumps and anything else

lowered car + super dragger barrel = trouble :)

I'd be interested if that fits r32?

I guess 3.5" for a rb20 light tune is a bit much isn't it ?

You can get a silencer option for that - i think it's just a plate or something that goes in *shrug*.

When you say drone... how drone? I like my mate's kakimoto cat back.. sounds awesome - not loud just meaty and low..

So anyone knows if it fits r32?

G'day someonestolecc,

Thanks for the PM, I really don't know whether it would fit a R32. I guess I hope somebody here can answer that. But yeah, coming from a stock exhaust, anything was always going to be a louder, and to me, just a bit disconcerting.

I got this, as it was supposedly a quieter exhaust..... hmmmm, all person preference, I guess.

if your so scared about getting a defect from copz, maybe your driving the wrong car and on the wrong forum. Copz will give you shyt even if you car is stock just because you drive a skyline. And i think 98.9% of the people's cars on this forum, are defectable. So seriously if i were you, i would worry about getting into driveways n shyt rather then gettin ***kt by copz.

Whoa Guilty..... some serious tough love there! hehe :)

Understand your point though. I have been pulled over numerous time for random checks, but when my car was stock, never any hassles, as it should have been. I don't want to intentionally defect my car, and waste my time and money on getting things epa'd etc etc.......hence the reason why I ask the question here.

So I'm guessing you've voted for the the "phuck it" option........ Thats cool, thanks for your opinion

Jimbo2000........ thanks for your words of confidence, I guess the only difference is that I live under the tyranny of the Bracks government. Vic is phucked when it comes to this...... then again, NSW is not much better is it???

Guest RedLineGTR

This is one of the few cat back quieter exhuast that you would be able to find for your car i only know 2 or so other brands that will give you good preformance and are quiet too. i Have one on atm it find it abit quiet sometimes and sometimes i want that raw RB sound lolz. When about half a year ago i had it testes this was with a high flow cat and a front pipe (no dump at that time) it was smack bang on the 90db reading and i passed the epa, which i was happy about but since now i have the dump pipe done it should be higher :)

G'day Rob, Thanks for your input mate. Here's one for you. If I am to keep it, to avoid any defect notice, I will need to raise the car.

So here are the options, raise the car, or change the exhaust.

Ride height

Exhaust????

Hmm, can height adjustables are out of the question, as I can't afford them! :rofl: There's some food for thought for ya!

Jimbo2000........ thanks for your words of confidence, I guess the only difference is that I live under the tyranny of the Bracks government. Vic is phucked when it comes to this...... then again, NSW is not much better is it???

aahh VIC righto.

from what i've read on here a skyline in vic.... might as well get an anus enlarging tool and get used to the feeling :rofl:

Throw your car into neutral whenever you see the 411 and you'll be alright. This solution can be hard when they're following you though.

It's not that tough to swap over an exhaust to clear a defect (especially if you have the original), so don't worry about it.

That said, if you drive your car around under 2000rpm and frequently visit dangerous areas (411 wise), then go for the stock unit.

just keep it on until you get defected IF you do. if u want something different i have a kakimoto muffler, the oval shape muffler one, its suppose to be fairly quiet too, been sitting in the garage for ages. will post it when i take some new pics of it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...