Jump to content
SAU Community

Recommended Posts

For Sale - RB26 Front Pipes.

These have been in my shed too long. I'm not going to use them like i thought i might. 
Pipes themselves are in ok condition. Some manipulation of the pipes has been undertaken by a previous owner/workshop. 
The gaskets are still in place, so some obvious cleanup is going to be necessary. The tabs (for mounting) are also mostly missing, so suggest you have a welder handy. 
You may want to remove the heat wrap too. It was there to support my custom turbo setup (different turbos, same position), so it may not match any one else's requirements. 

The exhaust was on my car originally when i purchased it and was good for 500kw so there shouldn't be any issue with these. 
However, with that said, i'm not an expert, please come and inspect them yourself if you have concerns. (Emphasis on this line!).

 

Prefer pickup only, but if buyer wants to arrange their own interstate transport, i'm cool with that too. 

Selling for $50. Nothing wrong with them, just want them out of my life. 

Edit: I'm in the inner Northern Suburbs of Melbourne. Best contact is here on the forum (i'm a lurker). We'll move to PMs for my details. :)

 
20190702_112215.thumb.jpg.0bdfff5d4d2714bec051054ab04d27b5.jpg  20190702_112449.thumb.jpg.04752412827d54da29be0dc157a4b306.jpg
 

20190702_112222.jpg

20190702_112226.jpg

20190702_112229.jpg

20190702_112236.jpg

20190702_112324.jpg

20190702_112346.jpg

20190702_112359.jpg

20190702_112417.jpg

20190702_112430.jpg

Edited by niZmO_Man
Multiple threads merged
Link to comment
https://www.sau.com.au/forums/topic/477611-rb26-r33-gtr-parts/
Share on other sites

For sale: Steering Trim / Steering Column Trims for R33 GTR (and probably GTS, GTSt etc).

These were pulled off my car when it was broken into. As such the trim itself is in poor condition with scratch marks all over the key hole area. It's not the end of the world, would suit someone who just needs this to clean up their missing interior.
Asking $10. Checking ebay this doesn't seem unreasonable. Doesn't come with the screws to put it in though.

I can put up more photos if you need.

I'm located in the inner northern (hipster land) of Melbourne. Reply here and i'll see it. :)

 

20190702_112524.thumb.jpg.653dea6dbfdcb1e88bfecbf2f4462f48.jpg

20190702_112540.thumb.jpg.071eef11ea4087df477b160d97af13bb.jpg20190702_112534.thumb.jpg.bff904f0ca920e6c07b724f6b7f98906.jpg

20190702_112542.thumb.jpg.e37a8289eeddc83f8cd88f50db922adc.jpg

Almost new Cat for sale. 

This cat came with my car from WA. I would suggest (although I can't confirm) that this cat was fitted for almost no time. I'd suggest the moment it passed inspection/emission the cat was pulled from the car and boxed up.
There is no gasket on the flanges as they look to be in excellent condition. The cat has been painted black, i assume in high temp paint for that stealth look (probs helps rust too). 

Unfortunately, I have no idea what this cat is or its make or model. Please don't request cell details, i have no idea (apologies in advance).

Asking $20. Pick up preferred, but happy to box for someone arranging their own shipping. 

I'm in the inner northern suburbs of Melbourne. You can reply to this thread or DM me. I'm active here so should see your replies. 

 

20190702_131230.jpg

20190702_131101.jpg

20190702_131103.jpg

20190702_131109.jpg

20190702_131113.jpg

20190702_131137.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...