Jump to content
SAU Community

Recommended Posts

if your shocks are seized, like mine were, when you "bounce" them, it feels rock hard and doesn't keep bouncing at all. but when i pulled them out it was clear that they were stuffed. now the rear end feels much better with bilsteins.

try running hicas diagnostics first though

Link to comment
https://www.sau.com.au/forums/topic/47817-hicas-or-shocks/#findComment-964226
Share on other sites

skyhigh: HICAS will feel like you're losing traction on the back end for a second, which then re-catches itself... if that makes any sense.

Bung shocks will be all over the place any time, regardless of cornering or driving straight.

Link to comment
https://www.sau.com.au/forums/topic/47817-hicas-or-shocks/#findComment-964932
Share on other sites

skyhigh: HICAS will feel like you're losing traction on the back end for a second, which then re-catches itself... if that makes any sense.

Bung shocks will be all over the place any time, regardless of cornering or driving straight.

yeah i think it must be the hicas then, cause its doing what you said. when drivin on the highway if you turn the wheel just a little bit the front turns,then its as though the rear swings itself around. it feels as though im "crab walkin" when i change lanes.

Link to comment
https://www.sau.com.au/forums/topic/47817-hicas-or-shocks/#findComment-965474
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...