Jump to content
SAU Community

Engine alert on dashboard

beast1

By beast1,
in General Maintenance

 Share

Recommended Posts

beast1 Newbie

beast1

Posted
Posted

hi all

I got engine alert (that yellow one on the dashboard) few days ago. I stopped the engine and waited for about 2 mins and started it again. No more alert. I've been driving after that for about 2 days and no problems.

what could that be? what r the first things to check ?

I think to run ECU diagnostic first, right?

If so, is this http://www.powerlink.co.nz/~graeme/faq/14.html the correct manual? My skyline is R34 GTS-four.

thanks!

Link to comment
https://www.sau.com.au/forums/topic/47882-engine-alert-on-dashboard/
Share on other sites
beast1 Newbie

beast1

Posted
  • Author
Posted
Engine light will come on if oil is low... might want to check oil pressure, temps, etc.

I though there is oil light is oil level is low. But it's not low.

Oil pressure is in the middle when the car is hot or close to right side when cold or accelerating really high. I don't know how to check oil temp...

What else can I check?

thanks

OMRAN Collaborator

OMRAN

Posted
Posted
ok, I've run ECU diag and got code 21. (two long flashes, one short)

21 Ignition circuit  

What should I do now? How to check/repair.  

please help as i'm new with skylines

i have r34 ... i had the same problem .... i was changing the plugs ... after i finish that .. i tryed to start the engine ... it started but gave me the check light .. did diag. and the same 21 ..ignition ..anyway the coils were pluged perfect :)

i unplug the coils wire and replug them again .. and every thing was cool ...

i didnt know why .. and thats it ..

am not sure about u'r problem ... !!

  • 2 weeks later...
GTRsean Grand Master

GTRsean

Posted
Posted
one more thing...

when the engine light is on, car vibrating slightly on idle

idle still stays fine (0.8)  

after restarting engine light is gone and vibration gone too

any ideas?

One cylinder is not firing, so you will get a slight vibe.

The computer will compensate for drop in idle and it will try to idle like nothings wrong.

Try disconnecting plug packs one by one and find out which cylinder it is.(If that doesn't help the other thing it could be is your ignition module).

Less likely: Have you checked your spark plugs.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...