Jump to content
SAU Community

Recommended Posts

Someone please help me, I'm dumb but like nice cars lol. I own a 2001 m35 nissan stagea, it's auto. Has electronic throttle body. Accelerator isn't working and it won't rev, it idles fine but tiny bit low, believe it's in limp mode as when I last had the car is was shutting down loosing power and wouldn't drive over approx 12kms, if you press the accelerator the bit inside the throttle body doesn't move. Wire that lead to throttle body and pedal both have voltage. I had in scanned by a mobile mechanic and no codes came up which i thought was strange but the guy said it was a good sign.

My brother who doesn't know much about imports thinks it could be the accelerator pedal sensor and took a photo of it for me and told me to locate someone selling that part, the number on the part is 18919-6N201 but when I search it nothing to do with a stagea comes up. Basically I'm after a part number so I can see if that's the issue and I'm also very very open to any other ideas to what my problem could be. My car was stolen and since having it recovered it's been this way. 

20200212_174717.jpg

20200212_174701.jpg

20200205_175118.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...