Jump to content
SAU Community

Recommended Posts

41 minutes ago, Ruka said:

Dosen any one know how to install a boost tap on a 2003 nissan stagea vq25det single turbo 

Only done it on a C34 but the principle is the same: find the line that goes to the w/g actuator and cut it to install boost tap. If there is a stock solenoid pull the hoses off it. You just want a hose going from boost source to actuator with a boost tap installed the right way round and with a bleed going to where-ever the bleed used to go. And of course you need a boost gauge so you know what you are doing.

Link to comment
https://www.sau.com.au/forums/topic/480597-vq25det/#findComment-7932958
Share on other sites

17 minutes ago, Ruka said:

By any chance would you have a photo of the line this my first time installing a boost tap 

 

17 minutes ago, Ruka said:

By any chance would you have a photo of the line this my first time installing a boost tap 

Google it. This isnt rocket science and 10s of thousands of people before you have figured it out without specific photos to spoon feed you.

 

 

 

 

What boost level do you plan on winding it up to?

Link to comment
https://www.sau.com.au/forums/topic/480597-vq25det/#findComment-7933004
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...