Jump to content
SAU Community

Recommended Posts

Price: $2,500 neg. 

Stud: 5x114.3

Size: 18x9.5 +20 offset (square)

Wrapped in Yokohama Advan AD08R with more than 60% tread. 255x35.

Price is negotiable within reason. Not desperate to sell though so keep the lowballs to yourself. These are gorgeous deep concave wheels discontinued by Work and replaced bt the T7r, which in my (and many others) opinion, the XT7 is a much cleaner design. The bronze is killer, look unreal on a black/white/grey cars and they’re absolutely perfect fitment on a 32GTR. See photo of them on mine. Also clear big brake kits. I have Evo9 Brembos and 350mm rotors, huge clearance. Two are in perfect condition, two have slight nicks on the very rim. Barely noticeable. See photos of individual wheels.

No buckles. No cracks. Located Hillside VIC for pickup. You're welcome to organise your own courier if require. IMG_5788.thumb.JPG.af4a2ec13d2fca6e308d1128a72bec8a.JPG

IMG_5464.thumb.JPG.490fcc817ffb2fe00eabe62d4ad67764.JPGIMG_5789.thumb.JPG.6555be5d8980ceb9682c808e51c2eb99.JPG

IMG_5785.thumb.JPG.e7eeddecbb5937cee67a37df5eb0df2a.JPGIMG_5784.thumb.JPG.93850bf53cc18fc056aeee23b45be7f4.JPGIMG_5783.thumb.JPG.76a8dc4d20556de7467a19cd22bd59eb.JPG

IMG_5781.thumb.JPG.fd65af1b1b55a229c6ddfec3e659af0d.JPGIMG_5782.thumb.JPG.bf66bc9dcd53aee6f7f78e3d0b82e6fb.JPGIMG_5780.thumb.jpg.9fdb0213e8e5c0a1ea98f5cce07bd708.jpgIMG_5779.thumb.jpg.f9382a5067d3379d1b11811d0e6f733f.jpg

 

Thanks for looking. 

 

 

Link to comment
https://www.sau.com.au/forums/topic/481777-work-xt7-wheels-with-yokohama-ad08r/
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...