Jump to content
SAU Community

Recommended Posts

Hey guys,

Although i am in the UK, hoping you guysc an help me out with identifying some OEM shock absorbers i can get for my R34 GTT.
I tried looking at the KYB & Monroe website for OEM parts (i got a standard R34 GTT) , but nothing shows up  :(

I cant imagine the the GTT has specific shock absorbers that no other car uses  (I wonder, given the rear brake rotors on the GTT are the same as the Z32  300zx/Fairlady , wonder if the shocks are ?? )
Trying to either find the Nissan OEM number, or the KYB part number for the shocks, or any standard OEM spec shocks i can use ?

Any ideas ?
:)

Link to comment
https://www.sau.com.au/forums/topic/481834-r34-gtt-oem-shock-absorbers/
Share on other sites

Do you want to be cheap? Or do you want to buy decent dampers? Because Bilstein B6 is the minimum that I would recommend for direct fit dampers.

Nothwithstanding that, I just typed "r34 kyb rear" into google and the first 2 hits were for an eBay listing and the actual web shop of this crowd here in Oz offering this https://www.superspares.com.au/2-rear-kyb-new-sr-special-shock-absorbers-for-niss~12193763

 

cheers for reply, not looking for cheap, just oem (standard car).....
I found the original part numbers last night, and the SR range of KYB for the R34 GTT  (same as your link)..

The idea was to buy OEM shocks, and add my Tein S springs to the shocks (already bought the springs before my pal told me i got x2 leaky shocks) .....
Being in the UK, coilovers are easier to obtain that shocks!

Selected Vehicle:
NISSAN SKYLINE R34 ER34 05/1998~05/2001 2 Door Coupe 2.5 litre, RB25DET I6 24v DOHC Turbo MPFI {208KW} RWD,AT/MT,[JAPAN] 12272
 
Shock/Strut - Front
image.gif.6280203887490948211e6610e1fa5d02.gifA12C6E050DA21BF458277473440D1DAE3F0A1B0612CB7F983FAB3430EFF3C0AB.jpg NSF9092

New SR Special - Enhanced Performance

2 req

Shock/Strut - Rear
image.gif.7913e75b64ab70f76943c3d75e0ccdae.gifB17930682718FF60403DBE2831C80BA316E2DA175F775161D39B804AA5C6ACA9.jpg NSF9093
Suits Lower Eyering Mount Type
New SR Special - Enhanced Performance

2 req

image.gif.9e6349fdf5e9c0b867aa5df3a3bdfc38.gifB9231E6738C028BA6761DCDFCCD05568A349DBB80C78E24729E4E8E81FFBC2D3.jpg NSF9095
Suits Lower U-bracket Mount Type
New SR Special - Enhanced Performance

2 req

Those Bilsteins above are for the GT with eyelet bottom. The GTT has fork bottom, like the GTR. But you can get B6s and B8s for GTRs, so I can't see that there would be too much trouble getting one for the GTT. I mean, superficially, you could just put the GTR one in. It will fit.

cheers guys
Turns out, i need to send my springs back to the supplier, and get coilovers instead...
And yes,I was looking at OEM (nissan), or a manufacturer that made OEM spec shocks for the car..
As said, mine is standard, but at the same time, was trying to keep my costs less when buying shock absorbers, compared with buying Coilovers....

The B6 & KYB SR shocks, even the Nissan OEM shocks = cost more than Tein Street Advance Coilovers.....
So end result is, i need to switch anyway....
Cheers for the replies though guys :)

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...