Jump to content
SAU Community

R35 fueling issue

Caroline

By Caroline,
in R35 GTR

 Share

Recommended Posts

Caroline Rookie

Caroline

Posted
Posted

Hello 👋, I have recently purchased a 2019 R35 GTR ❤️ and am having trouble fueling it. The fuel Pump cuts off constantly, I’ve tried every angle and depth and it just doesn’t work! Makes me feel like an idiot at the petrol station to have this magnificent car that I can’t put petrol in 😖. On researching it seems it’s a known problem with a Nissan Tech sheet fix. I was wondering if anyone had done the fix or worked out another way to fuel their car smoothly. Thankyou 🤗

C44101DE-5FA9-4003-A7C5-BE7D947E4424.thumb.jpeg.7102d48763e2e8a80fab5e9dd6d612a7.jpeg

Link to comment
https://www.sau.com.au/forums/topic/482969-r35-fueling-issue/
Share on other sites
  • 1 month later...
joshuaho96 Veteran

joshuaho96

Posted
Posted
On 11/1/2021 at 3:41 PM, Caroline said:

I’ve tried that 

Do you have any evap codes? If a vent valve is jammed from overfilling in the past it can cause these issues. Otherwise my experience is that most cars if you angle the nozzle closer to being perpendicular to the ground a lot of cars tend to experience less fuel frothing/obstruction that can prematurely trip the sensor. The 996 is one of those cars where the nozzle has to go in upside down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • MBS206
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By MBS206 · Posted

      Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...