Jump to content
SAU Community

Recommended Posts

Hi all,

Had this car for over 10 years never had an issue until recently the radiator died. I took it to the nearest mechanic who is having trouble locating the correct radiator. He says the existing one is ~768mm and can only find ~738mm ones. I am wondering if this one will fit? https://www.ebay.com.au/itm/221523529412 

If not, where can I find one that will?

Thanks for any help

390239_10150532391155803_221498456_n.jpg

or this one

https://www.ebay.com.au/itm/Premium-Quality-Radiator-NISSAN-Skyline-V35-350-GT-V6-Import-01-07-Free-Cap-/222007317525?epid=902011418&hash=item33b0aad415:g:63IAAOSw23NZm2M2

It says

There are two types of radiator could fit this model. 

Please check the bottom fan mounts.
This radiator has Rectangular pin fan mounts,
for the 'Round pin' shape mount 

please check  ebay # 222007317525

as long as it mounts up and the hoses are in the right spot, it probably doesn't matter too much if the core is slightly smaller.

I just used a Koyo unit, just make sure you get the right mounts, some have round pins on the bottom, some have rectangular.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...